SATA Dry Jet 2 Blow Gun 217489
SATA Dry Jet 2 Blow Gun
To ensure a fast drying process following waterborne paint, it is vital to apply as much air as possible within a short period of time onto the painted object. To achieve this, the SATA dry jet 2 also relies on the Venturi principle like its predecessor: In addition to the compressed air feeding the system, a multiple of ambient air is drawn in that serves directly to accelerate the drying process.
The design of the flat fan nozzle gives the dry jet 2 an extra large air footprint, further increasing the drying efficiency, helping reduce the flash-off time and enhancing the quality of the drying process simultaneously.
- The recommended Inlet Pressure is 29 to 35 psi and uses CFM 8.2 to 9.35 CFM
- The Venturi principle design the CFM is magnified x10 to give a 92.35 CFM output
– Due to the integrated air regulation, the painter can precisely adjust the air supply to adapt the airflow volume to ideally suit the requirements of the painted object
- A painter can dry entire side of a car with one SATA dry jet 2
An integrated 125μ sieve serves to filter contamination from the aspirated air. The SATA dry jet 2 uses the same 125μ filter as the SATA RPS cup lids, the filters are also available separately in a 10 pack (part no. 222125)
All goods are supplied with a manufacturers twelve month warranty, (or longer in some cases), provided the goods are used in accordance with the manufacturer's instructions. This warranty does not apply to any defect which arises from general wear and tear, losses caused by loss of use of the goods, wilful or accidental damage, or negligence by you or any third party. The cost of returning goods for repair/replacement is the responsibility of the owner, we may request that the item is returned direct to the manufacturer for repair/replacement - if so we will liaise between both parties.
If the goods supplied to you are damaged on delivery they should be signed for as such and you should notify in writing via the e-mail address or fax number shown on the contact page within 48 hours. Your statutory rights are not affected.
