Q-Tech
The QTech QT190 Airless Paint Sprayer is a fantastic entry-level sprayer for the professional painter/decorator. Compact, lightweight and easy to transport, as well as simple to use and clean with longer in-service life.
Featuring professional oversized pistons and packings, meaning less wear and tear, and it also includes the high-performance made-in-Term USA TriTech T360 Contractor gun & tip.
Most importantly, it is supplied with a 2-year warranty as standard. In other words, from January 2020, an extra year’s warranty is available with Warranty Plus when you register your machine within three months of purchase (registration form link can be found below).
- Emulsion, interior and exterior
- Water or solvent-based top coats
- Wood preservatives
- Most other low-viscosity water or solvent-based coatings
- Exterior masonry coatings and some interior emulsions may need thinning in line with recommendations.
- Suitable for smooth coatings only
Usage frequency:
- Occasional: Approx once a week for small to medium tasks.
Complete with:
- TriTech T360 Contractor spray gun
- Contractor 517 airless tip
- TriTech Contractor safety guard
- 1/4″ x 7.5m textile hose assembly
- QLube x 237ml piston lubricant
QTech QT190 Airless Paint Sprayer Specification:
- Flow 1.90 ltr/min
- Max tip 0.021″
- MWP 207 bar | 3000 psi
- Motor 700 watt
- Weight 11.4 kg
- Power supply 110 / 230 volt
Warranty:
For two years from the date of purchase, QTech Airless Sprayers are warranted under normal use and service against all manufacturing defects. Replacement of any and all worn parts, including the packings, prime valve and piston, due to normal in-service wear and tear is not covered by this warranty. As a result of this, where servicing has not been carried out at the recommended intervals, this could invalidate the warranty.
To apply for the additional years warranty with the 2+1 Year Defect Warranty Plus. Please use the following link and complete the registration form within three months of purchase https://sprayforthedecorator.com/warrantyplus/
Also included are over £75.00 of free extras:
1 x 18" Extension (Great for ceilings)
4 x Extra SES spray tips with filters to suit
5 x 600mm Pre-taped masking rolls
Q-Tech Q Tector Large 946ml 32Oz
Q-Lube piston pube is specially formulated to dissolve and prevent adhesion of material on piston rods, reduce premature wear on cylinders and keep dry uppper packings lubricated and free from dried pigment particles.
For use with all brands and models of airless paint sprayer systems
Apply a few drops around the upper packing before each use and improve the life of your machine
Q-Tector pump flush cleans the complete system during the final rinse and deposits a protective lubricating film keeping your pump in top condition and protects it from corrosion and freezing. Suits all pump makes, prolongs pump packings and helps prevent valves sticking.
Manufactured from high quality aluminium in Switzerland. Q-Tech airless spray tip extension with 7/8″ thread gives you extra reach when spraying paint. Ideal for spraying soffits, high ceilings and can also reduce back fatigue when spraying floors and decks.
Available in the following lengths:
15cm/6″
25cm/10″
38cm/15″
50cm/20″
The perfect accessory for the Q-Tech QT190 allowing far smaller quantities for paint and coatings to be applied with less waste.
Small enough to use anywhere at anytime, inside and out. It’s easy to carry with a new designed easy grip handle and a net weight of only 11.4 kg, yet the pump is capable of working with spray tips up to 21 thou. Equip with the correct type of spray tip (if you need help choosing, give us a call!) and it is suitable for applying a range of both solvent and water based coatings onto any type of surface. Ideal for the professional decorator, factory maintainer, fabricators or contractors, where an exceptional finish is desired but an airless pump is not needed all day, every day.
- Even more portable, versatile and reliable, with a new updated packing kit and new redesigned gear head.
- Compact, and light. Takes up little space in your van.
- Wearing parts can be purchased and replaced easily
- Comes completely ready to spray with the best TriTech T360 airless spray gun, TriTech 517 tip and Guard and 7.5m hose + Tools as well as a brand new pressure gauge.
Use to spray
- Emulsion, interior and exterior.
- Top coats
- Wood preservatives
- Most other low-viscosity water or solvent based coatings.
- Suitable for smooth coatings only.
Supplied with 1.5mm nozzle
Cup (Gravity): 600ml
Non-bleed design, air only passes through when trigger is pulled
Side mounted spray pattern control knob allows continuous easy adjustment
Centre mounted 600cc nylon gravity cup
A stay-cool nylon handle (fitted over a metal tube)
Stainless steel fluid passages and external needle packing adjustment
Metal fluid knob and collar, stainless steel internal components
Rear rotating nipple for pressure tubes, easier use for the left-handed
The Q75 Spray Gun features an exclusive side-mounted pattern control knob to adjust the size of the fan. This knob allows you to switch from a small to large spray pattern, or anywhere in between. Unlike HVLP turbine spray guns with the front collar adjustment, the pattern control knob offers full incremental fan size throughout the whole range. The fan pattern is adjustable from 25mm to 380mm from a distance of 200mm. Smaller than 25mm is achieved by moving closer to the object to be sprayed. In a nutshell, this gun is completely 100% controllable!
10-2011
Genuine high quality part