Pressure Tanks Stainless Steel (Tank Only)
We have a pressure feed tanks to suit water based and other demanding environments, sizes from 10 litre to 50 litre, with a choice of either no agitation or pneumatic agitation.
Features
10ltr capacity
MWP 60psi / 4Bar
Lever valves for both air and fluid
Pressure regulator
Pressure gauge
Safety blow off air valve
No agitation
Air release valve
ATEx rated, CE & TUV approved
Weight 11.5Kg
Indicated earth point, earth lead and spanner included
We have a pressure feed tanks to suit all requirements, sizes from 2 litre to 40 litre, some with a choice of either manual or pneumatic agitation, and the option (on 10 litre models) of a bottom feed to suit heavy coatings. These are ideal for a production environment or where ever a large surface area needs coating to a high standard quick time. All of our pressure feed tanks are supplied ready to use complete with pressure gauge, air regulator, safety valve and air & material valves, top feed models are also supplied with a material strainer, we can also supply complete with both air and fluid lines ranging from 5m to 20m and a choice of pressure fed spray guns.
Important points regarding pressure tanks.
The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a maximum working pressure 10psi less than technical maximum.
Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
10ltr capacity
MWP 60psi / 4Bar
Lever valves for both air and fluid
Pressure regulator
Pressure gauge
Safety blow off air valve
No agitation
Air release valve
ATEx rated, CE & TUV approved
Weight 11.5Kg
Indicated earth point, earth lead and spanner included
We have a pressure feed tanks to suit all requirements, sizes from 2 litre to 40 litre, some with a choice of either manual or pneumatic agitation, and the option (on 10 litre models) of a bottom feed to suit heavy coatings. These are ideal for a production environment or where ever a large surface area needs coating to a high standard quick time. All of our pressure feed tanks are supplied ready to use complete with pressure gauge, air regulator, safety valve and air & material valves, top feed models are also supplied with a material strainer, we can also supply complete with both air and fluid lines ranging from 5m to 20m and a choice of pressure fed spray guns.
Important points regarding pressure tanks.
The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a maximum working pressure 10psi less than technical maximum.
Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
Features
10ltr capacity
MWP 60psi / 4Bar
Lever valves for both air and fluid
Pressure regulator
Pressure gauge
Safety blow off air valve
Air driven agitation
Air release valve
ATEx rated, CE & TUV approved
Weight 13.5Kg
Indicated earth point, earth lead and spanner included
We have a pressure feed tanks to suit all requirements, sizes from 2 litre to 40 litre, some with a choice of either manual or pneumatic agitation, and the option (on 10 litre models) of a bottom feed to suit heavy coatings. These are ideal for a production environment or where ever a large surface area needs coating to a high standard quick time. All of our pressure feed tanks are supplied ready to use complete with pressure gauge, air regulator, safety valve and air & material valves, top feed models are also supplied with a material strainer, we can also supply complete with both air and fluid lines ranging from 5m to 20m and a choice of pressure fed spray guns.
Important points regarding pressure tanks.
The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a maximum working pressure 10psi less than technical maximum.
Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
10ltr capacity
MWP 60psi / 4Bar
Lever valves for both air and fluid
Pressure regulator
Pressure gauge
Safety blow off air valve
Air driven agitation
Air release valve
ATEx rated, CE & TUV approved
Weight 13.5Kg
Indicated earth point, earth lead and spanner included
We have a pressure feed tanks to suit all requirements, sizes from 2 litre to 40 litre, some with a choice of either manual or pneumatic agitation, and the option (on 10 litre models) of a bottom feed to suit heavy coatings. These are ideal for a production environment or where ever a large surface area needs coating to a high standard quick time. All of our pressure feed tanks are supplied ready to use complete with pressure gauge, air regulator, safety valve and air & material valves, top feed models are also supplied with a material strainer, we can also supply complete with both air and fluid lines ranging from 5m to 20m and a choice of pressure fed spray guns.
Important points regarding pressure tanks.
The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a maximum working pressure 10psi less than technical maximum.
Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
Features
20ltr capacity
MWP 60psi /4Bar
Lever valves for both air and fluid
Pressure regulator
Pressure gauge
Safety blow off air valve
No agitation
Air release valve
ATEx rated, CE & TUV approved
Weight 22.3Kg
Indicated earth point, earth lead and spanner included
We have a pressure feed tanks to suit all requirements, sizes from 2 litre to 60 litre, some with a choice of either manual or pneumatic agitation, and the option (on 10 litre models) of a bottom feed to suit heavy coatings. These are ideal for a production environment or where ever a large surface area needs coating to a high standard quick time. All of our pressure feed tanks are supplied ready to use complete with pressure gauge, air regulator, safety valve and air & material valves, top feed models are also supplied with a material strainer, we can also supply complete with both air and fluid lines ranging from 5m to 20m and a choice of pressure fed spray guns.
Important points regarding pressure tanks.
The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a maximum working pressure 10psi less than technical maximum.
Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
20ltr capacity
MWP 60psi /4Bar
Lever valves for both air and fluid
Pressure regulator
Pressure gauge
Safety blow off air valve
No agitation
Air release valve
ATEx rated, CE & TUV approved
Weight 22.3Kg
Indicated earth point, earth lead and spanner included
We have a pressure feed tanks to suit all requirements, sizes from 2 litre to 60 litre, some with a choice of either manual or pneumatic agitation, and the option (on 10 litre models) of a bottom feed to suit heavy coatings. These are ideal for a production environment or where ever a large surface area needs coating to a high standard quick time. All of our pressure feed tanks are supplied ready to use complete with pressure gauge, air regulator, safety valve and air & material valves, top feed models are also supplied with a material strainer, we can also supply complete with both air and fluid lines ranging from 5m to 20m and a choice of pressure fed spray guns.
Important points regarding pressure tanks.
The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a maximum working pressure 10psi less than technical maximum.
Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
Features
20ltr capacity
MWP 60psi / 4Bar
Lever valves for both air and fluid
Pressure regulator
Pressure gauge
Safety blow off air valve
Air driven agitation
Air release valve
ATEx rated, CE & TUV approved
Weight 24.3Kg
Indicated earth point, earth lead and spanner included
We have a pressure feed tanks to suit all requirements, sizes from 2 litre to 40 litre, some with a choice of either manual or pneumatic agitation, and the option (on 10 litre models) of a bottom feed to suit heavy coatings. These are ideal for a production environment or where ever a large surface area needs coating to a high standard quick time. All of our pressure feed tanks are supplied ready to use complete with pressure gauge, air regulator, safety valve and air & material valves, top feed models are also supplied with a material strainer, we can also supply complete with both air and fluid lines ranging from 5m to 20m and a choice of pressure fed spray guns.
Important points regarding pressure tanks.
The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a maximum working pressure 10psi less than technical maximum.
Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
20ltr capacity
MWP 60psi / 4Bar
Lever valves for both air and fluid
Pressure regulator
Pressure gauge
Safety blow off air valve
Air driven agitation
Air release valve
ATEx rated, CE & TUV approved
Weight 24.3Kg
Indicated earth point, earth lead and spanner included
We have a pressure feed tanks to suit all requirements, sizes from 2 litre to 40 litre, some with a choice of either manual or pneumatic agitation, and the option (on 10 litre models) of a bottom feed to suit heavy coatings. These are ideal for a production environment or where ever a large surface area needs coating to a high standard quick time. All of our pressure feed tanks are supplied ready to use complete with pressure gauge, air regulator, safety valve and air & material valves, top feed models are also supplied with a material strainer, we can also supply complete with both air and fluid lines ranging from 5m to 20m and a choice of pressure fed spray guns.
Important points regarding pressure tanks.
The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a maximum working pressure 10psi less than technical maximum.
Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
Features
50ltr capacity
MWP 60psi /4Bar
Lever valves for both air and fluid
Pressure regulator
Pressure gauge
Safety blow off air valve
No agitation
Air release valve
ATEx rated, CE & TUV approved
Weight 30.0Kg
Indicated earth point, earth lead and spanner included
We have a pressure feed tanks to suit all requirements, sizes from 2 litre to 60 litre, some with a choice of either manual or pneumatic agitation, and the option (on 10 litre models) of a bottom feed to suit heavy coatings. These are ideal for a production environment or where ever a large surface area needs coating to a high standard quick time. All of our pressure feed tanks are supplied ready to use complete with pressure gauge, air regulator, safety valve and air & material valves, top feed models are also supplied with a material strainer, we can also supply complete with both air and fluid lines ranging from 5m to 20m and a choice of pressure fed spray guns.
Important points regarding pressure tanks.
The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a maximum working pressure 10psi less than technical maximum.
Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
50ltr capacity
MWP 60psi /4Bar
Lever valves for both air and fluid
Pressure regulator
Pressure gauge
Safety blow off air valve
No agitation
Air release valve
ATEx rated, CE & TUV approved
Weight 30.0Kg
Indicated earth point, earth lead and spanner included
We have a pressure feed tanks to suit all requirements, sizes from 2 litre to 60 litre, some with a choice of either manual or pneumatic agitation, and the option (on 10 litre models) of a bottom feed to suit heavy coatings. These are ideal for a production environment or where ever a large surface area needs coating to a high standard quick time. All of our pressure feed tanks are supplied ready to use complete with pressure gauge, air regulator, safety valve and air & material valves, top feed models are also supplied with a material strainer, we can also supply complete with both air and fluid lines ranging from 5m to 20m and a choice of pressure fed spray guns.
Important points regarding pressure tanks.
The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a maximum working pressure 10psi less than technical maximum.
Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
Features
50ltr capacity
MWP 60psi /4Bar
Lever valves for both air and fluid
Pressure regulator
Pressure gauge
Safety blow off air valve
Air driven agitation
Air release valve
ATEx rated, CE & TUV approved
Weight 32.0Kg
Indicated earth point, earth lead and spanner included
We have a pressure feed tanks to suit all requirements, sizes from 2 litre to 60 litre, some with a choice of either manual or pneumatic agitation, and the option (on 10 litre models) of a bottom feed to suit heavy coatings. These are ideal for a production environment or where ever a large surface area needs coating to a high standard quick time. All of our pressure feed tanks are supplied ready to use complete with pressure gauge, air regulator, safety valve and air & material valves, top feed models are also supplied with a material strainer, we can also supply complete with both air and fluid lines ranging from 5m to 20m and a choice of pressure fed spray guns.
Important points regarding pressure tanks.
The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a maximum working pressure 10psi less than technical maximum.
Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
50ltr capacity
MWP 60psi /4Bar
Lever valves for both air and fluid
Pressure regulator
Pressure gauge
Safety blow off air valve
Air driven agitation
Air release valve
ATEx rated, CE & TUV approved
Weight 32.0Kg
Indicated earth point, earth lead and spanner included
We have a pressure feed tanks to suit all requirements, sizes from 2 litre to 60 litre, some with a choice of either manual or pneumatic agitation, and the option (on 10 litre models) of a bottom feed to suit heavy coatings. These are ideal for a production environment or where ever a large surface area needs coating to a high standard quick time. All of our pressure feed tanks are supplied ready to use complete with pressure gauge, air regulator, safety valve and air & material valves, top feed models are also supplied with a material strainer, we can also supply complete with both air and fluid lines ranging from 5m to 20m and a choice of pressure fed spray guns.
Important points regarding pressure tanks.
The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a maximum working pressure 10psi less than technical maximum.
Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.