TriTech
T93R ULTRA FINISH SERIES
The T93R Airless Tip System from TriTech Industries is the longest lasting, highest-quality tip and guard available to today's professional painter.
Ultra fine atomisation and working pressures as low as 800psi give you consistent high performance day-in and day-out and low mist spray most demanding work environments.
Features include:
Patented seal alignment system for quick and accurate installation
Mega-hard tungsten carbide for long duty life
Hand-tight guard with large knurls for a sure grip
Tip size tag for quick and accurate size identification
Tip ring feature allows you to store tips on a belt clip or a hook
Unique double-orifice atomizes the coating twice - each time finer than the first to achieve an ultra fine finish. 11 fan pattern/orifice size combinations are available.
T93R CONTRACTOR SERIES
The T93R Airless Tip System from TriTech Industries is the longest lasting, highest-quality tip and guard available to today's professional painter.
It's loaded with patented and exclusive features that give you consistent, dependable performance day-in and day-out in the most demanding work environments.
Features include:
Patented seal alignment system for quick and accurate installation
Mega-hard tungsten carbide for long duty life
Hand-tight guard with large knurls for a sure grip
Tip size tag for quick and accurate size identification
Tip ring feature allows you to store tips on a belt clip or a hook
The T93R is available in many fan width/orifice combinations so you can match the right tip to every coating you spray.
5000 PSI (345 BAR)
Part No: 200-XXX
The TriTech flat tip uses the same T93 tungsten carbide found in the T93R contractor tip.
Uses 93C Carbide pressed into a high grade stainless housing. A stainless steel insert is pressed behind the carbide to increase laminar flow and improve atomization. The insert also improves the life of the carbide because less pressure is required to achieve atomization.
Includes 205-990 Flat Tip solvent proof gasket
For use with the T93F 205-999 Tip Guard
TriTech T93F Airless Flat Tip Guard
7/8"
The hand-tight T93F Safety Guard for 206-XXX Ultra Flat Tips
Large knurls for a sure grip.
5000 PSI (345 BAR)
We have a fully equipped pump repair shop and can offer help and advice via email, phone or WhatsApp.
We also stock hoses, pistons, prime valves etc etc, too many to list everything. Email or call us if you do not find what you need.
We have a fully equipped pump repair shop and can offer help and advice via email, phone or WhatsApp.
We also stock hoses, pistons, prime valves etc etc, too many to list everything. Email or call us if you do not find what you need.
The perfect accessory for the Tritech T Series airless allowing far smaller quantities for paint and coatings to be applied with less waste.
TriTech T3 Stand Complete is best for contractors that intend to spray up to 230 litres per week for small to medium projects. This lightweight sprayer weighs about 14kg and is made from a durable lightweight all metal construction. The T3 uses Military grade aircraft aluminium, stainless steel and their patented T93 Tungsten Carbide.
T3 Carry 230v - 599-924
Features -
- Precision Motor Control. PMC matches the motor speed to the pressure and tip size selected.
- No pulsation at any pressure with any size tip.
- Balanced fluid manifold
- No cylinder to wear out
- Lightweight, easy to carry
- Built for professional use
- All metal construction
- 110v and 230v motor options
- High grade aluminium for the control box, motor cover and heat sink - aluminium dissipates heat, as opposed to plastic which retains it.
- Steel cut and precision ground gears - running in synthetic grease for positive heat transfer.
- Frame from chrome plated heavy walled steel tubing, immensely strong and tough.
- TriTech proprietary carbide blend is used for the ball and seat to give a superior and positive shut off.
The types of material to be sprayed include:
- Interior / exterior water based wall paint
- Enamels
- Acrylics
- Oil based primers and finishes
Includes:
- T3 Airless Sprayer Pump and Stand
- TriTech Gauge 2.5" 5000 PSI + 350 BAR
- TriTech High Pressure Airless Hose
- TriTech T360 Spray Gun
TriTech Airless Pumps With A Lifetime Warranty
TriTech takes great pride in its manufacturing capabilities and that all of their equipment is ‘100% USA Designed & Manufactured’. We believe that if you’re going to put your name on something – you need to be prepared to back it up. TriTech are – with a lifetime warranty.
Motor & Drivetrain Lifetime Warranty
The motor, motor brushes and drive train are warranted to the original purchaser only under normal use and service against defects in craftsman-ship or material for the lifetime of the product.
Wearing Parts Two Year Warranty
Should the packings, piston or prime valve need replacing within two years of the original purchase this will be carried out by an approved service agent at no cost to the purchaser; this is a one-time only change within the warranty period.
Craftsmanship Four Year Warranty
Outside of what is listed above TriTech airless sprayers are warranted under normal use and service against manufacturing defects for four years from the date of original purchase.