Pressure Tanks (Tank Only)
We have a pressure feed tanks to suit all requirements, sizes from 2 litre to 60 litre, some with a choice of either manual or pneumatic agitation, and the option (on 10 & 20 litre models) of a bottom feed to suit heavy coatings.
Features
10ltr capacity
MWP 80psi / 5.5Bar
Lever valves for both air and fluid
Pressure regulator
Pressure gauge
Safety blow off air valve
No agitation
Air release valve
ATEx rated, CE & TUV approved
Weight 11.5Kg
Indicated earth point, earth lead and spanner included
We have a pressure feed tanks to suit all requirements, sizes from 2 litre to 40 litre, some with a choice of either manual or pneumatic agitation, and the option (on 10 litre models) of a bottom feed to suit heavy coatings. These are ideal for a production environment or where ever a large surface area needs coating to a high standard quick time. All of our pressure feed tanks are supplied ready to use complete with pressure gauge, air regulator, safety valve and air & material valves, top feed models are also supplied with a material strainer, we can also supply complete with both air and fluid lines ranging from 5m to 20m and a choice of pressure fed spray guns.
Important points regarding pressure tanks.
The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a maximum working pressure 10psi less than technical maximum.
Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
10ltr capacity
MWP 80psi / 5.5Bar
Lever valves for both air and fluid
Pressure regulator
Pressure gauge
Safety blow off air valve
No agitation
Air release valve
ATEx rated, CE & TUV approved
Weight 11.5Kg
Indicated earth point, earth lead and spanner included
We have a pressure feed tanks to suit all requirements, sizes from 2 litre to 40 litre, some with a choice of either manual or pneumatic agitation, and the option (on 10 litre models) of a bottom feed to suit heavy coatings. These are ideal for a production environment or where ever a large surface area needs coating to a high standard quick time. All of our pressure feed tanks are supplied ready to use complete with pressure gauge, air regulator, safety valve and air & material valves, top feed models are also supplied with a material strainer, we can also supply complete with both air and fluid lines ranging from 5m to 20m and a choice of pressure fed spray guns.
Important points regarding pressure tanks.
The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a maximum working pressure 10psi less than technical maximum.
Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
Features
10ltr capacity
MWP 60psi / 4Bar
Aluminium liner
Lever valves for air
Pressure regulator
Pressure gauge
Safety blow off air valve
Manual agitation
Air release valve
ATEx rated, CE & TUV approved
Weight 15.3Kg
Indicated earth point, earth lead and spanner included
We have a pressure feed tanks to suit all requirements, sizes from 2 litre to 40 litre, some with a choice of either manual or pneumatic agitation, and the option (on 10 litre models) of a bottom feed to suit heavy coatings. These are ideal for a production environment or where ever a large surface area needs coating to a high standard quick time. All of our pressure feed tanks are supplied ready to use complete with pressure gauge, air regulator, safety valve and air & material valves, top feed models are also supplied with a material strainer, we can also supply complete with both air and fluid lines ranging from 5m to 20m and a choice of pressure fed spray guns.
Important points regarding pressure tanks.
The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a maximum working pressure 10psi less than technical maximum.
Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
10ltr capacity
MWP 60psi / 4Bar
Aluminium liner
Lever valves for air
Pressure regulator
Pressure gauge
Safety blow off air valve
Manual agitation
Air release valve
ATEx rated, CE & TUV approved
Weight 15.3Kg
Indicated earth point, earth lead and spanner included
We have a pressure feed tanks to suit all requirements, sizes from 2 litre to 40 litre, some with a choice of either manual or pneumatic agitation, and the option (on 10 litre models) of a bottom feed to suit heavy coatings. These are ideal for a production environment or where ever a large surface area needs coating to a high standard quick time. All of our pressure feed tanks are supplied ready to use complete with pressure gauge, air regulator, safety valve and air & material valves, top feed models are also supplied with a material strainer, we can also supply complete with both air and fluid lines ranging from 5m to 20m and a choice of pressure fed spray guns.
Important points regarding pressure tanks.
The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a maximum working pressure 10psi less than technical maximum.
Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
Features
10ltr capacity
MWP 60psi / 4Bar
Aluminium liner
Lever valves for air
Pressure regulator
Pressure gauge
Safety blow off air valve
Air driven agitation
Air release valve
ATEx rated, CE & TUV approved
Weight 17.0Kg
Indicated earth point, earth lead and spanner included
We have a pressure feed tanks to suit all requirements, sizes from 2 litre to 60 litre, some with a choice of either manual or pneumatic agitation, and the option (on 10 litre models) of a bottom feed to suit heavy coatings. These are ideal for a production environment or where ever a large surface area needs coating to a high standard quick time. All of our pressure feed tanks are supplied ready to use complete with pressure gauge, air regulator, safety valve and air & material valves, top feed models are also supplied with a material strainer, we can also supply complete with both air and fluid lines ranging from 5m to 20m and a choice of pressure fed spray guns.
Important points regarding pressure tanks.
The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a maximum working pressure 10psi less than technical maximum.
Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
10ltr capacity
MWP 60psi / 4Bar
Aluminium liner
Lever valves for air
Pressure regulator
Pressure gauge
Safety blow off air valve
Air driven agitation
Air release valve
ATEx rated, CE & TUV approved
Weight 17.0Kg
Indicated earth point, earth lead and spanner included
We have a pressure feed tanks to suit all requirements, sizes from 2 litre to 60 litre, some with a choice of either manual or pneumatic agitation, and the option (on 10 litre models) of a bottom feed to suit heavy coatings. These are ideal for a production environment or where ever a large surface area needs coating to a high standard quick time. All of our pressure feed tanks are supplied ready to use complete with pressure gauge, air regulator, safety valve and air & material valves, top feed models are also supplied with a material strainer, we can also supply complete with both air and fluid lines ranging from 5m to 20m and a choice of pressure fed spray guns.
Important points regarding pressure tanks.
The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a maximum working pressure 10psi less than technical maximum.
Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
Features
10ltr capacity
MWP 60psi / 4Bar
No liner
Lever valves for air
Pressure regulator
Pressure gauge
Safety blow off air valve
Manual agitation
Air release valve
ATEx rated, CE & TUV approved
Weight 15.3Kg
Indicated earth point, earth lead and spanner included
We have a pressure feed tanks to suit all requirements, sizes from 2 litre to 40 litre, some with a choice of either manual or pneumatic agitation, and the option (on 10 litre models) of a bottom feed to suit heavy coatings. These are ideal for a production environment or where ever a large surface area needs coating to a high standard quick time. All of our pressure feed tanks are supplied ready to use complete with pressure gauge, air regulator, safety valve and air & material valves, top feed models are also supplied with a material strainer, we can also supply complete with both air and fluid lines ranging from 5m to 20m and a choice of pressure fed spray guns.
Important points regarding pressure tanks.
The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a maximum working pressure 10psi less than technical maximum.
Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
10ltr capacity
MWP 60psi / 4Bar
No liner
Lever valves for air
Pressure regulator
Pressure gauge
Safety blow off air valve
Manual agitation
Air release valve
ATEx rated, CE & TUV approved
Weight 15.3Kg
Indicated earth point, earth lead and spanner included
We have a pressure feed tanks to suit all requirements, sizes from 2 litre to 40 litre, some with a choice of either manual or pneumatic agitation, and the option (on 10 litre models) of a bottom feed to suit heavy coatings. These are ideal for a production environment or where ever a large surface area needs coating to a high standard quick time. All of our pressure feed tanks are supplied ready to use complete with pressure gauge, air regulator, safety valve and air & material valves, top feed models are also supplied with a material strainer, we can also supply complete with both air and fluid lines ranging from 5m to 20m and a choice of pressure fed spray guns.
Important points regarding pressure tanks.
The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a maximum working pressure 10psi less than technical maximum.
Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
Features
20ltr capacity
MWP 80psi / 5.5Bar
Stainless steel liner
Lever valves for both air and fluid
Pressure regulator
Pressure gauge
Safety blow off air valve
No agitation
Air release valve
ATEx rated, CE & TUV approved
Weight 23.1Kg
Indicated earth point, earth lead and spanner included
We have a pressure feed tanks to suit all requirements, sizes from 2 litre to 60 litre, some with a choice of either manual or pneumatic agitation, and the option (on 10 litre models) of a bottom feed to suit heavy coatings. These are ideal for a production environment or where ever a large surface area needs coating to a high standard quick time. All of our pressure feed tanks are supplied ready to use complete with pressure gauge, air regulator, safety valve and air & material valves, top feed models are also supplied with a material strainer, we can also supply complete with both air and fluid lines ranging from 5m to 20m and a choice of pressure fed spray guns.
Important points regarding pressure tanks.
The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a maximum working pressure 10psi less than technical maximum.
Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
20ltr capacity
MWP 80psi / 5.5Bar
Stainless steel liner
Lever valves for both air and fluid
Pressure regulator
Pressure gauge
Safety blow off air valve
No agitation
Air release valve
ATEx rated, CE & TUV approved
Weight 23.1Kg
Indicated earth point, earth lead and spanner included
We have a pressure feed tanks to suit all requirements, sizes from 2 litre to 60 litre, some with a choice of either manual or pneumatic agitation, and the option (on 10 litre models) of a bottom feed to suit heavy coatings. These are ideal for a production environment or where ever a large surface area needs coating to a high standard quick time. All of our pressure feed tanks are supplied ready to use complete with pressure gauge, air regulator, safety valve and air & material valves, top feed models are also supplied with a material strainer, we can also supply complete with both air and fluid lines ranging from 5m to 20m and a choice of pressure fed spray guns.
Important points regarding pressure tanks.
The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a maximum working pressure 10psi less than technical maximum.
Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
Features
20ltr capacity
MWP 60psi / 4Bar
Stainless steel liner
Lever valves for both air and fluid
Pressure regulator
Pressure gauge
Safety blow off air valve
Air driven agitator
Air release valve
ATEx rated, CE & TUV approved
Weight 25.1Kg
Indicated earth point, earth lead and spanner included
We have a pressure feed tanks to suit all requirements, sizes from 2 litre to 60 litre, some with a choice of either manual or pneumatic agitation, and the option (on 10 litre models) of a bottom feed to suit heavy coatings. These are ideal for a production environment or where ever a large surface area needs coating to a high standard quick time. All of our pressure feed tanks are supplied ready to use complete with pressure gauge, air regulator, safety valve and air & material valves, top feed models are also supplied with a material strainer, we can also supply complete with both air and fluid lines ranging from 5m to 20m and a choice of pressure fed spray guns.
Important points regarding pressure tanks.
The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a maximum working pressure 10psi less than technical maximum.
Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
20ltr capacity
MWP 60psi / 4Bar
Stainless steel liner
Lever valves for both air and fluid
Pressure regulator
Pressure gauge
Safety blow off air valve
Air driven agitator
Air release valve
ATEx rated, CE & TUV approved
Weight 25.1Kg
Indicated earth point, earth lead and spanner included
We have a pressure feed tanks to suit all requirements, sizes from 2 litre to 60 litre, some with a choice of either manual or pneumatic agitation, and the option (on 10 litre models) of a bottom feed to suit heavy coatings. These are ideal for a production environment or where ever a large surface area needs coating to a high standard quick time. All of our pressure feed tanks are supplied ready to use complete with pressure gauge, air regulator, safety valve and air & material valves, top feed models are also supplied with a material strainer, we can also supply complete with both air and fluid lines ranging from 5m to 20m and a choice of pressure fed spray guns.
Important points regarding pressure tanks.
The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a maximum working pressure 10psi less than technical maximum.
Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
Features
20ltr capacity
MWP 60psi / 4Bar
Stainless steel liner
Lever valves for both air and fluid
Pressure regulator
Pressure gauge
Safety blow off air valve
Manual agitator
Air release valve
ATEx rated, CE & TUV approved
Weight 24Kg
Indicated earth point, earth lead and spanner included
We have a pressure feed tanks to suit all requirements, sizes from 2 litre to 60 litre, some with a choice of either manual or pneumatic agitation, and the option (on 10 litre models) of a bottom feed to suit heavy coatings. These are ideal for a production environment or where ever a large surface area needs coating to a high standard quick time. All of our pressure feed tanks are supplied ready to use complete with pressure gauge, air regulator, safety valve and air & material valves, top feed models are also supplied with a material strainer, we can also supply complete with both air and fluid lines ranging from 5m to 20m and a choice of pressure fed spray guns.
Important points regarding pressure tanks.
The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a maximum working pressure 10psi less than technical maximum.
Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
20ltr capacity
MWP 60psi / 4Bar
Stainless steel liner
Lever valves for both air and fluid
Pressure regulator
Pressure gauge
Safety blow off air valve
Manual agitator
Air release valve
ATEx rated, CE & TUV approved
Weight 24Kg
Indicated earth point, earth lead and spanner included
We have a pressure feed tanks to suit all requirements, sizes from 2 litre to 60 litre, some with a choice of either manual or pneumatic agitation, and the option (on 10 litre models) of a bottom feed to suit heavy coatings. These are ideal for a production environment or where ever a large surface area needs coating to a high standard quick time. All of our pressure feed tanks are supplied ready to use complete with pressure gauge, air regulator, safety valve and air & material valves, top feed models are also supplied with a material strainer, we can also supply complete with both air and fluid lines ranging from 5m to 20m and a choice of pressure fed spray guns.
Important points regarding pressure tanks.
The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a maximum working pressure 10psi less than technical maximum.
Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
Features
20ltr capacity
MWP 60psi / 4Bar
No liner
Lever valves for both air and fluid
Pressure regulator
Pressure gauge
Safety blow off air valve
No agitation
Air release valve
ATEx rated, CE & TUV approved
Weight 25.1Kg
Indicated earth point, earth lead and spanner included
We have a pressure feed tanks to suit all requirements, sizes from 2 litre to 60 litre, some with a choice of either manual or pneumatic agitation, and the option (on 10 litre models) of a bottom feed to suit heavy coatings. These are ideal for a production environment or where ever a large surface area needs coating to a high standard quick time. All of our pressure feed tanks are supplied ready to use complete with pressure gauge, air regulator, safety valve and air & material valves, top feed models are also supplied with a material strainer, we can also supply complete with both air and fluid lines ranging from 5m to 20m and a choice of pressure fed spray guns.
Important points regarding pressure tanks.
The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a maximum working pressure 10psi less than technical maximum.
Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
20ltr capacity
MWP 60psi / 4Bar
No liner
Lever valves for both air and fluid
Pressure regulator
Pressure gauge
Safety blow off air valve
No agitation
Air release valve
ATEx rated, CE & TUV approved
Weight 25.1Kg
Indicated earth point, earth lead and spanner included
We have a pressure feed tanks to suit all requirements, sizes from 2 litre to 60 litre, some with a choice of either manual or pneumatic agitation, and the option (on 10 litre models) of a bottom feed to suit heavy coatings. These are ideal for a production environment or where ever a large surface area needs coating to a high standard quick time. All of our pressure feed tanks are supplied ready to use complete with pressure gauge, air regulator, safety valve and air & material valves, top feed models are also supplied with a material strainer, we can also supply complete with both air and fluid lines ranging from 5m to 20m and a choice of pressure fed spray guns.
Important points regarding pressure tanks.
The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a maximum working pressure 10psi less than technical maximum.
Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
Features
20ltr capacity
MWP 60psi / 4Bar
No liner
Lever valves for both air and fluid
Pressure regulator
Pressure gauge
Safety blow off air valve
Manual agitator
Air release valve
ATEx rated, CE & TUV approved
Weight 25.1Kg
Indicated earth point, earth lead and spanner included
We have a pressure feed tanks to suit all requirements, sizes from 2 litre to 60 litre, some with a choice of either manual or pneumatic agitation, and the option (on 10 litre models) of a bottom feed to suit heavy coatings. These are ideal for a production environment or where ever a large surface area needs coating to a high standard quick time. All of our pressure feed tanks are supplied ready to use complete with pressure gauge, air regulator, safety valve and air & material valves, top feed models are also supplied with a material strainer, we can also supply complete with both air and fluid lines ranging from 5m to 20m and a choice of pressure fed spray guns.
Important points regarding pressure tanks.
The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a maximum working pressure 10psi less than technical maximum.
Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
20ltr capacity
MWP 60psi / 4Bar
No liner
Lever valves for both air and fluid
Pressure regulator
Pressure gauge
Safety blow off air valve
Manual agitator
Air release valve
ATEx rated, CE & TUV approved
Weight 25.1Kg
Indicated earth point, earth lead and spanner included
We have a pressure feed tanks to suit all requirements, sizes from 2 litre to 60 litre, some with a choice of either manual or pneumatic agitation, and the option (on 10 litre models) of a bottom feed to suit heavy coatings. These are ideal for a production environment or where ever a large surface area needs coating to a high standard quick time. All of our pressure feed tanks are supplied ready to use complete with pressure gauge, air regulator, safety valve and air & material valves, top feed models are also supplied with a material strainer, we can also supply complete with both air and fluid lines ranging from 5m to 20m and a choice of pressure fed spray guns.
Important points regarding pressure tanks.
The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a maximum working pressure 10psi less than technical maximum.
Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
Features
40ltr capacity
MWP 80psi / 5.5Bar
Stainless steel liner
Lever valves for both air and fluid
Pressure regulator
Pressure gauge
Safety blow off air valve
No agitation
Air release valve
ATEx rated, CE & TUV approved
Weight 26Kg
Indicated earth point, earth lead and spanner included
We have a pressure feed tanks to suit all requirements, sizes from 2 litre to 60 litre, some with a choice of either manual or pneumatic agitation, and the option (on 10 litre models) of a bottom feed to suit heavy coatings. These are ideal for a production environment or where ever a large surface area needs coating to a high standard quick time. All of our pressure feed tanks are supplied ready to use complete with pressure gauge, air regulator, safety valve and air & material valves, top feed models are also supplied with a material strainer, we can also supply complete with both air and fluid lines ranging from 5m to 20m and a choice of pressure fed spray guns.
Important points regarding pressure tanks.
The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a maximum working pressure 10psi less than technical maximum.
Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
40ltr capacity
MWP 80psi / 5.5Bar
Stainless steel liner
Lever valves for both air and fluid
Pressure regulator
Pressure gauge
Safety blow off air valve
No agitation
Air release valve
ATEx rated, CE & TUV approved
Weight 26Kg
Indicated earth point, earth lead and spanner included
We have a pressure feed tanks to suit all requirements, sizes from 2 litre to 60 litre, some with a choice of either manual or pneumatic agitation, and the option (on 10 litre models) of a bottom feed to suit heavy coatings. These are ideal for a production environment or where ever a large surface area needs coating to a high standard quick time. All of our pressure feed tanks are supplied ready to use complete with pressure gauge, air regulator, safety valve and air & material valves, top feed models are also supplied with a material strainer, we can also supply complete with both air and fluid lines ranging from 5m to 20m and a choice of pressure fed spray guns.
Important points regarding pressure tanks.
The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a maximum working pressure 10psi less than technical maximum.
Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
Features
40ltr capacity
MWP 60psi / 4Bar
Stainless steel liner
Lever valves for both air and fluid
Pressure regulator
Pressure gauge
Safety blow off air valve
Manual agitator
Air release valve
ATEx rated, CE & TUV approved
Weight 26Kg
Indicated earth point, earth lead and spanner included
We have a pressure feed tanks to suit all requirements, sizes from 2 litre to 60 litre, some with a choice of either manual or pneumatic agitation, and the option (on 10 litre models) of a bottom feed to suit heavy coatings. These are ideal for a production environment or where ever a large surface area needs coating to a high standard quick time. All of our pressure feed tanks are supplied ready to use complete with pressure gauge, air regulator, safety valve and air & material valves, top feed models are also supplied with a material strainer, we can also supply complete with both air and fluid lines ranging from 5m to 20m and a choice of pressure fed spray guns.
Important points regarding pressure tanks.
The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a maximum working pressure 10psi less than technical maximum.
Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
40ltr capacity
MWP 60psi / 4Bar
Stainless steel liner
Lever valves for both air and fluid
Pressure regulator
Pressure gauge
Safety blow off air valve
Manual agitator
Air release valve
ATEx rated, CE & TUV approved
Weight 26Kg
Indicated earth point, earth lead and spanner included
We have a pressure feed tanks to suit all requirements, sizes from 2 litre to 60 litre, some with a choice of either manual or pneumatic agitation, and the option (on 10 litre models) of a bottom feed to suit heavy coatings. These are ideal for a production environment or where ever a large surface area needs coating to a high standard quick time. All of our pressure feed tanks are supplied ready to use complete with pressure gauge, air regulator, safety valve and air & material valves, top feed models are also supplied with a material strainer, we can also supply complete with both air and fluid lines ranging from 5m to 20m and a choice of pressure fed spray guns.
Important points regarding pressure tanks.
The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a maximum working pressure 10psi less than technical maximum.
Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
Features
40ltr capacity
MWP 60psi / 4Bar
Stainless steel liner
Lever valves for both air and fluid
Pressure regulator
Pressure gauge
Safety blow off air valve
Air driven agitator
Air release valve
ATEx rated, CE & TUV approved
Weight 28Kg
Indicated earth point, earth lead and spanner included
We have a pressure feed tanks to suit all requirements, sizes from 2 litre to 60 litre, some with a choice of either manual or pneumatic agitation, and the option (on 10 litre models) of a bottom feed to suit heavy coatings. These are ideal for a production environment or where ever a large surface area needs coating to a high standard quick time. All of our pressure feed tanks are supplied ready to use complete with pressure gauge, air regulator, safety valve and air & material valves, top feed models are also supplied with a material strainer, we can also supply complete with both air and fluid lines ranging from 5m to 20m and a choice of pressure fed spray guns.
Important points regarding pressure tanks.
The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a maximum working pressure 10psi less than technical maximum.
Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
40ltr capacity
MWP 60psi / 4Bar
Stainless steel liner
Lever valves for both air and fluid
Pressure regulator
Pressure gauge
Safety blow off air valve
Air driven agitator
Air release valve
ATEx rated, CE & TUV approved
Weight 28Kg
Indicated earth point, earth lead and spanner included
We have a pressure feed tanks to suit all requirements, sizes from 2 litre to 60 litre, some with a choice of either manual or pneumatic agitation, and the option (on 10 litre models) of a bottom feed to suit heavy coatings. These are ideal for a production environment or where ever a large surface area needs coating to a high standard quick time. All of our pressure feed tanks are supplied ready to use complete with pressure gauge, air regulator, safety valve and air & material valves, top feed models are also supplied with a material strainer, we can also supply complete with both air and fluid lines ranging from 5m to 20m and a choice of pressure fed spray guns.
Important points regarding pressure tanks.
The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a maximum working pressure 10psi less than technical maximum.
Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.