Anest Iwata W200 Integra FT Pressure Spray Gun

Anest Iwata W200 Integra Ft Pressure Spray Gun

£322.83 Excluding VAT

The new Anest Iwata W200 Integra pressure feed air spray gun is a high quality full-size spray gun designed for use exclusively with paint pressure pots or double diaphragm pumps.

Designed for EASIER MAINTENANCE than most guns on the market having been designed with fewer deeper and coarser thread pitches meaning you only have to turn the air cap one and a half turns for removal. NO BAFFLES needed with this gun so less parts to stock and replace saving you time and money, the INTEGRA also has the tried and tested ONE COMPONENT NEEDLE PACKING cartridge.
Designed with a new LINEAR FAN ADJUSTER for a more responsive finer incremented adjustment which also helps when precise adjustment is needed and a quicker full fan to spot is required. The AIR VALVE SEAT is also new with oversized distribution holes which helps control the balance and performance of the droplets and improves the atomisation properties of the spray gun.

FT nozzle
EXTENDED LIFESPAN with its new internal chrome plating
SMOOTH RESPONSIVE TRIGGER
REDESIGNED AIR VALVE SEAT making easy maintenance and reducing the risk of damage from over-tightening
NEW ERGONOMIC GUN BODY AND DESIGN
GROOVED NEEDLE END for easier removal

Set Up Size

0.8mm 1.0mm 1.2mm 1.4mm 1.5mm

Quantity

← Back to Anest Iwata

Downloads

Anest Iwata W200 Integra

The new Anest Iwata W200 Integra pressure feed air spray gun is a high quality full-size spray gun designed for use exclusively with paint pressure pots or double diaphragm pumps.

FT nozzle
EXTENDED LIFESPAN with its new internal chrome plating
SMOOTH RESPONSIVE TRIGGER
REDESIGNED AIR VALVE SEAT making easy maintenance and reducing the risk of damage from over-tightening
NEW ERGONOMIC GUN BODY AND DESIGN
GROOVED NEEDLE END for easier removal

All goods are supplied with a manufacturers twelve month warranty, (or longer in some cases), provided the goods are used in accordance with the manufacturer's instructions. This warranty does not apply to any defect which arises from general wear and tear, losses caused by loss of use of the goods, wilful or accidental damage, or negligence by you or any third party. The cost of returning goods for repair/replacement is the responsibility of the owner, we may request that the item is returned direct to the manufacturer for repair/replacement - if so we will liaise between both parties.

If the goods supplied to you are damaged on delivery they should be signed for as such and you should notify in writing via the e-mail address or fax number shown on the contact page within 48 hours. Your statutory rights are not affected.

Other Customers also buy:

{"id":6660068180105,"title":"Anest Iwata W200 Integra FT Pressure Spray Gun","handle":"anest-iwata-w200-integra-ft-pressure-spray-gun","description":"\u003cdiv class=\"spec\"\u003eThe new Anest Iwata W200 Integra pressure feed air spray gun is a high quality full-size spray gun designed for use exclusively with paint pressure pots or double diaphragm pumps.\u003c\/div\u003e\n\u003cdiv class=\"desc\"\u003eDesigned for EASIER MAINTENANCE than most guns on the market having been designed with fewer deeper and coarser thread pitches meaning you only have to turn the air cap one and a half turns for removal. NO BAFFLES needed with this gun so less parts to stock and replace saving you time and money, the INTEGRA also has the tried and tested ONE COMPONENT NEEDLE PACKING cartridge.\u003cbr data-mce-fragment=\"1\"\u003e Designed with a new LINEAR FAN ADJUSTER for a more responsive finer incremented adjustment which also helps when precise adjustment is needed and a quicker full fan to spot is required. The AIR VALVE SEAT is also new with oversized distribution holes which helps control the balance and performance of the droplets and improves the atomisation properties of the spray gun.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eFT nozzle\u003c\/li\u003e\n\u003cli\u003eEXTENDED LIFESPAN with its new internal chrome plating\u003c\/li\u003e\n\u003cli\u003eSMOOTH RESPONSIVE TRIGGER\u003c\/li\u003e\n\u003cli\u003eREDESIGNED AIR VALVE SEAT making easy maintenance and reducing the risk of damage from over-tightening\u003c\/li\u003e\n\u003cli\u003eNEW ERGONOMIC GUN BODY AND DESIGN\u003c\/li\u003e\n\u003cli\u003eGROOVED NEEDLE END for easier removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr\u003e\n\u003c\/div\u003e","published_at":"2021-10-06T08:33:07Z","created_at":"2021-10-06T08:28:42Z","vendor":"Spray Guns","type":"","tags":["Anest Iwata"],"price":32283,"price_min":32283,"price_max":32283,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39536839065737,"title":"0.8mm","option1":"0.8mm","option2":null,"option3":null,"sku":"130459A0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anest Iwata W200 Integra FT Pressure Spray Gun - 0.8mm","public_title":"0.8mm","options":["0.8mm"],"price":32283,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":39536839098505,"title":"1.0mm","option1":"1.0mm","option2":null,"option3":null,"sku":"130460A0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anest Iwata W200 Integra FT Pressure Spray Gun - 1.0mm","public_title":"1.0mm","options":["1.0mm"],"price":32283,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":39536839131273,"title":"1.2mm","option1":"1.2mm","option2":null,"option3":null,"sku":"130461A0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anest Iwata W200 Integra FT Pressure Spray Gun - 1.2mm","public_title":"1.2mm","options":["1.2mm"],"price":32283,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":39576308678793,"title":"1.4mm","option1":"1.4mm","option2":null,"option3":null,"sku":"130462A0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anest Iwata W200 Integra FT Pressure Spray Gun - 1.4mm","public_title":"1.4mm","options":["1.4mm"],"price":32283,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":39706079592585,"title":"1.5mm","option1":"1.5mm","option2":null,"option3":null,"sku":"130463A0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anest Iwata W200 Integra FT Pressure Spray Gun - 1.5mm","public_title":"1.5mm","options":["1.5mm"],"price":32283,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-110.jpg?v=1707405729","\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-345.jpg?v=1707405732"],"featured_image":"\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-110.jpg?v=1707405729","options":["Set Up Size"],"media":[{"alt":"Anest Iwata W200 Integra Ft Pressure Spray Gun","id":24535906910345,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-110.jpg?v=1707405729"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-110.jpg?v=1707405729","width":800},{"alt":"Anest Iwata W200 Integra Ft Pressure Spray Gun","id":24535907008649,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-345.jpg?v=1707405732"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-345.jpg?v=1707405732","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"spec\"\u003eThe new Anest Iwata W200 Integra pressure feed air spray gun is a high quality full-size spray gun designed for use exclusively with paint pressure pots or double diaphragm pumps.\u003c\/div\u003e\n\u003cdiv class=\"desc\"\u003eDesigned for EASIER MAINTENANCE than most guns on the market having been designed with fewer deeper and coarser thread pitches meaning you only have to turn the air cap one and a half turns for removal. NO BAFFLES needed with this gun so less parts to stock and replace saving you time and money, the INTEGRA also has the tried and tested ONE COMPONENT NEEDLE PACKING cartridge.\u003cbr data-mce-fragment=\"1\"\u003e Designed with a new LINEAR FAN ADJUSTER for a more responsive finer incremented adjustment which also helps when precise adjustment is needed and a quicker full fan to spot is required. The AIR VALVE SEAT is also new with oversized distribution holes which helps control the balance and performance of the droplets and improves the atomisation properties of the spray gun.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eFT nozzle\u003c\/li\u003e\n\u003cli\u003eEXTENDED LIFESPAN with its new internal chrome plating\u003c\/li\u003e\n\u003cli\u003eSMOOTH RESPONSIVE TRIGGER\u003c\/li\u003e\n\u003cli\u003eREDESIGNED AIR VALVE SEAT making easy maintenance and reducing the risk of damage from over-tightening\u003c\/li\u003e\n\u003cli\u003eNEW ERGONOMIC GUN BODY AND DESIGN\u003c\/li\u003e\n\u003cli\u003eGROOVED NEEDLE END for easier removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr\u003e\n\u003c\/div\u003e"}
10 tear off visor covers for Anest Iwata airfed mask VIUAF2020K10

Translation missing: en.products.product.regular_price £18.69
{"id":6660068180105,"title":"Anest Iwata W200 Integra FT Pressure Spray Gun","handle":"anest-iwata-w200-integra-ft-pressure-spray-gun","description":"\u003cdiv class=\"spec\"\u003eThe new Anest Iwata W200 Integra pressure feed air spray gun is a high quality full-size spray gun designed for use exclusively with paint pressure pots or double diaphragm pumps.\u003c\/div\u003e\n\u003cdiv class=\"desc\"\u003eDesigned for EASIER MAINTENANCE than most guns on the market having been designed with fewer deeper and coarser thread pitches meaning you only have to turn the air cap one and a half turns for removal. NO BAFFLES needed with this gun so less parts to stock and replace saving you time and money, the INTEGRA also has the tried and tested ONE COMPONENT NEEDLE PACKING cartridge.\u003cbr data-mce-fragment=\"1\"\u003e Designed with a new LINEAR FAN ADJUSTER for a more responsive finer incremented adjustment which also helps when precise adjustment is needed and a quicker full fan to spot is required. The AIR VALVE SEAT is also new with oversized distribution holes which helps control the balance and performance of the droplets and improves the atomisation properties of the spray gun.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eFT nozzle\u003c\/li\u003e\n\u003cli\u003eEXTENDED LIFESPAN with its new internal chrome plating\u003c\/li\u003e\n\u003cli\u003eSMOOTH RESPONSIVE TRIGGER\u003c\/li\u003e\n\u003cli\u003eREDESIGNED AIR VALVE SEAT making easy maintenance and reducing the risk of damage from over-tightening\u003c\/li\u003e\n\u003cli\u003eNEW ERGONOMIC GUN BODY AND DESIGN\u003c\/li\u003e\n\u003cli\u003eGROOVED NEEDLE END for easier removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr\u003e\n\u003c\/div\u003e","published_at":"2021-10-06T08:33:07Z","created_at":"2021-10-06T08:28:42Z","vendor":"Spray Guns","type":"","tags":["Anest Iwata"],"price":32283,"price_min":32283,"price_max":32283,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39536839065737,"title":"0.8mm","option1":"0.8mm","option2":null,"option3":null,"sku":"130459A0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anest Iwata W200 Integra FT Pressure Spray Gun - 0.8mm","public_title":"0.8mm","options":["0.8mm"],"price":32283,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":39536839098505,"title":"1.0mm","option1":"1.0mm","option2":null,"option3":null,"sku":"130460A0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anest Iwata W200 Integra FT Pressure Spray Gun - 1.0mm","public_title":"1.0mm","options":["1.0mm"],"price":32283,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":39536839131273,"title":"1.2mm","option1":"1.2mm","option2":null,"option3":null,"sku":"130461A0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anest Iwata W200 Integra FT Pressure Spray Gun - 1.2mm","public_title":"1.2mm","options":["1.2mm"],"price":32283,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":39576308678793,"title":"1.4mm","option1":"1.4mm","option2":null,"option3":null,"sku":"130462A0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anest Iwata W200 Integra FT Pressure Spray Gun - 1.4mm","public_title":"1.4mm","options":["1.4mm"],"price":32283,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":39706079592585,"title":"1.5mm","option1":"1.5mm","option2":null,"option3":null,"sku":"130463A0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anest Iwata W200 Integra FT Pressure Spray Gun - 1.5mm","public_title":"1.5mm","options":["1.5mm"],"price":32283,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-110.jpg?v=1707405729","\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-345.jpg?v=1707405732"],"featured_image":"\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-110.jpg?v=1707405729","options":["Set Up Size"],"media":[{"alt":"Anest Iwata W200 Integra Ft Pressure Spray Gun","id":24535906910345,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-110.jpg?v=1707405729"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-110.jpg?v=1707405729","width":800},{"alt":"Anest Iwata W200 Integra Ft Pressure Spray Gun","id":24535907008649,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-345.jpg?v=1707405732"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-345.jpg?v=1707405732","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"spec\"\u003eThe new Anest Iwata W200 Integra pressure feed air spray gun is a high quality full-size spray gun designed for use exclusively with paint pressure pots or double diaphragm pumps.\u003c\/div\u003e\n\u003cdiv class=\"desc\"\u003eDesigned for EASIER MAINTENANCE than most guns on the market having been designed with fewer deeper and coarser thread pitches meaning you only have to turn the air cap one and a half turns for removal. NO BAFFLES needed with this gun so less parts to stock and replace saving you time and money, the INTEGRA also has the tried and tested ONE COMPONENT NEEDLE PACKING cartridge.\u003cbr data-mce-fragment=\"1\"\u003e Designed with a new LINEAR FAN ADJUSTER for a more responsive finer incremented adjustment which also helps when precise adjustment is needed and a quicker full fan to spot is required. The AIR VALVE SEAT is also new with oversized distribution holes which helps control the balance and performance of the droplets and improves the atomisation properties of the spray gun.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eFT nozzle\u003c\/li\u003e\n\u003cli\u003eEXTENDED LIFESPAN with its new internal chrome plating\u003c\/li\u003e\n\u003cli\u003eSMOOTH RESPONSIVE TRIGGER\u003c\/li\u003e\n\u003cli\u003eREDESIGNED AIR VALVE SEAT making easy maintenance and reducing the risk of damage from over-tightening\u003c\/li\u003e\n\u003cli\u003eNEW ERGONOMIC GUN BODY AND DESIGN\u003c\/li\u003e\n\u003cli\u003eGROOVED NEEDLE END for easier removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr\u003e\n\u003c\/div\u003e"}
Anest Iwata AF2020 Air Fed Mask - Class 3

Translation missing: en.products.product.regular_price £269.00
{"id":6660068180105,"title":"Anest Iwata W200 Integra FT Pressure Spray Gun","handle":"anest-iwata-w200-integra-ft-pressure-spray-gun","description":"\u003cdiv class=\"spec\"\u003eThe new Anest Iwata W200 Integra pressure feed air spray gun is a high quality full-size spray gun designed for use exclusively with paint pressure pots or double diaphragm pumps.\u003c\/div\u003e\n\u003cdiv class=\"desc\"\u003eDesigned for EASIER MAINTENANCE than most guns on the market having been designed with fewer deeper and coarser thread pitches meaning you only have to turn the air cap one and a half turns for removal. NO BAFFLES needed with this gun so less parts to stock and replace saving you time and money, the INTEGRA also has the tried and tested ONE COMPONENT NEEDLE PACKING cartridge.\u003cbr data-mce-fragment=\"1\"\u003e Designed with a new LINEAR FAN ADJUSTER for a more responsive finer incremented adjustment which also helps when precise adjustment is needed and a quicker full fan to spot is required. The AIR VALVE SEAT is also new with oversized distribution holes which helps control the balance and performance of the droplets and improves the atomisation properties of the spray gun.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eFT nozzle\u003c\/li\u003e\n\u003cli\u003eEXTENDED LIFESPAN with its new internal chrome plating\u003c\/li\u003e\n\u003cli\u003eSMOOTH RESPONSIVE TRIGGER\u003c\/li\u003e\n\u003cli\u003eREDESIGNED AIR VALVE SEAT making easy maintenance and reducing the risk of damage from over-tightening\u003c\/li\u003e\n\u003cli\u003eNEW ERGONOMIC GUN BODY AND DESIGN\u003c\/li\u003e\n\u003cli\u003eGROOVED NEEDLE END for easier removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr\u003e\n\u003c\/div\u003e","published_at":"2021-10-06T08:33:07Z","created_at":"2021-10-06T08:28:42Z","vendor":"Spray Guns","type":"","tags":["Anest Iwata"],"price":32283,"price_min":32283,"price_max":32283,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39536839065737,"title":"0.8mm","option1":"0.8mm","option2":null,"option3":null,"sku":"130459A0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anest Iwata W200 Integra FT Pressure Spray Gun - 0.8mm","public_title":"0.8mm","options":["0.8mm"],"price":32283,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":39536839098505,"title":"1.0mm","option1":"1.0mm","option2":null,"option3":null,"sku":"130460A0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anest Iwata W200 Integra FT Pressure Spray Gun - 1.0mm","public_title":"1.0mm","options":["1.0mm"],"price":32283,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":39536839131273,"title":"1.2mm","option1":"1.2mm","option2":null,"option3":null,"sku":"130461A0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anest Iwata W200 Integra FT Pressure Spray Gun - 1.2mm","public_title":"1.2mm","options":["1.2mm"],"price":32283,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":39576308678793,"title":"1.4mm","option1":"1.4mm","option2":null,"option3":null,"sku":"130462A0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anest Iwata W200 Integra FT Pressure Spray Gun - 1.4mm","public_title":"1.4mm","options":["1.4mm"],"price":32283,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":39706079592585,"title":"1.5mm","option1":"1.5mm","option2":null,"option3":null,"sku":"130463A0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anest Iwata W200 Integra FT Pressure Spray Gun - 1.5mm","public_title":"1.5mm","options":["1.5mm"],"price":32283,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-110.jpg?v=1707405729","\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-345.jpg?v=1707405732"],"featured_image":"\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-110.jpg?v=1707405729","options":["Set Up Size"],"media":[{"alt":"Anest Iwata W200 Integra Ft Pressure Spray Gun","id":24535906910345,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-110.jpg?v=1707405729"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-110.jpg?v=1707405729","width":800},{"alt":"Anest Iwata W200 Integra Ft Pressure Spray Gun","id":24535907008649,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-345.jpg?v=1707405732"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-345.jpg?v=1707405732","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"spec\"\u003eThe new Anest Iwata W200 Integra pressure feed air spray gun is a high quality full-size spray gun designed for use exclusively with paint pressure pots or double diaphragm pumps.\u003c\/div\u003e\n\u003cdiv class=\"desc\"\u003eDesigned for EASIER MAINTENANCE than most guns on the market having been designed with fewer deeper and coarser thread pitches meaning you only have to turn the air cap one and a half turns for removal. NO BAFFLES needed with this gun so less parts to stock and replace saving you time and money, the INTEGRA also has the tried and tested ONE COMPONENT NEEDLE PACKING cartridge.\u003cbr data-mce-fragment=\"1\"\u003e Designed with a new LINEAR FAN ADJUSTER for a more responsive finer incremented adjustment which also helps when precise adjustment is needed and a quicker full fan to spot is required. The AIR VALVE SEAT is also new with oversized distribution holes which helps control the balance and performance of the droplets and improves the atomisation properties of the spray gun.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eFT nozzle\u003c\/li\u003e\n\u003cli\u003eEXTENDED LIFESPAN with its new internal chrome plating\u003c\/li\u003e\n\u003cli\u003eSMOOTH RESPONSIVE TRIGGER\u003c\/li\u003e\n\u003cli\u003eREDESIGNED AIR VALVE SEAT making easy maintenance and reducing the risk of damage from over-tightening\u003c\/li\u003e\n\u003cli\u003eNEW ERGONOMIC GUN BODY AND DESIGN\u003c\/li\u003e\n\u003cli\u003eGROOVED NEEDLE END for easier removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr\u003e\n\u003c\/div\u003e"}
Anest Iwata LPH80 HVLP Mini Spray Gun

£204.50
{"id":6660068180105,"title":"Anest Iwata W200 Integra FT Pressure Spray Gun","handle":"anest-iwata-w200-integra-ft-pressure-spray-gun","description":"\u003cdiv class=\"spec\"\u003eThe new Anest Iwata W200 Integra pressure feed air spray gun is a high quality full-size spray gun designed for use exclusively with paint pressure pots or double diaphragm pumps.\u003c\/div\u003e\n\u003cdiv class=\"desc\"\u003eDesigned for EASIER MAINTENANCE than most guns on the market having been designed with fewer deeper and coarser thread pitches meaning you only have to turn the air cap one and a half turns for removal. NO BAFFLES needed with this gun so less parts to stock and replace saving you time and money, the INTEGRA also has the tried and tested ONE COMPONENT NEEDLE PACKING cartridge.\u003cbr data-mce-fragment=\"1\"\u003e Designed with a new LINEAR FAN ADJUSTER for a more responsive finer incremented adjustment which also helps when precise adjustment is needed and a quicker full fan to spot is required. The AIR VALVE SEAT is also new with oversized distribution holes which helps control the balance and performance of the droplets and improves the atomisation properties of the spray gun.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eFT nozzle\u003c\/li\u003e\n\u003cli\u003eEXTENDED LIFESPAN with its new internal chrome plating\u003c\/li\u003e\n\u003cli\u003eSMOOTH RESPONSIVE TRIGGER\u003c\/li\u003e\n\u003cli\u003eREDESIGNED AIR VALVE SEAT making easy maintenance and reducing the risk of damage from over-tightening\u003c\/li\u003e\n\u003cli\u003eNEW ERGONOMIC GUN BODY AND DESIGN\u003c\/li\u003e\n\u003cli\u003eGROOVED NEEDLE END for easier removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr\u003e\n\u003c\/div\u003e","published_at":"2021-10-06T08:33:07Z","created_at":"2021-10-06T08:28:42Z","vendor":"Spray Guns","type":"","tags":["Anest Iwata"],"price":32283,"price_min":32283,"price_max":32283,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39536839065737,"title":"0.8mm","option1":"0.8mm","option2":null,"option3":null,"sku":"130459A0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anest Iwata W200 Integra FT Pressure Spray Gun - 0.8mm","public_title":"0.8mm","options":["0.8mm"],"price":32283,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":39536839098505,"title":"1.0mm","option1":"1.0mm","option2":null,"option3":null,"sku":"130460A0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anest Iwata W200 Integra FT Pressure Spray Gun - 1.0mm","public_title":"1.0mm","options":["1.0mm"],"price":32283,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":39536839131273,"title":"1.2mm","option1":"1.2mm","option2":null,"option3":null,"sku":"130461A0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anest Iwata W200 Integra FT Pressure Spray Gun - 1.2mm","public_title":"1.2mm","options":["1.2mm"],"price":32283,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":39576308678793,"title":"1.4mm","option1":"1.4mm","option2":null,"option3":null,"sku":"130462A0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anest Iwata W200 Integra FT Pressure Spray Gun - 1.4mm","public_title":"1.4mm","options":["1.4mm"],"price":32283,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":39706079592585,"title":"1.5mm","option1":"1.5mm","option2":null,"option3":null,"sku":"130463A0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anest Iwata W200 Integra FT Pressure Spray Gun - 1.5mm","public_title":"1.5mm","options":["1.5mm"],"price":32283,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-110.jpg?v=1707405729","\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-345.jpg?v=1707405732"],"featured_image":"\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-110.jpg?v=1707405729","options":["Set Up Size"],"media":[{"alt":"Anest Iwata W200 Integra Ft Pressure Spray Gun","id":24535906910345,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-110.jpg?v=1707405729"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-110.jpg?v=1707405729","width":800},{"alt":"Anest Iwata W200 Integra Ft Pressure Spray Gun","id":24535907008649,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-345.jpg?v=1707405732"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-345.jpg?v=1707405732","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"spec\"\u003eThe new Anest Iwata W200 Integra pressure feed air spray gun is a high quality full-size spray gun designed for use exclusively with paint pressure pots or double diaphragm pumps.\u003c\/div\u003e\n\u003cdiv class=\"desc\"\u003eDesigned for EASIER MAINTENANCE than most guns on the market having been designed with fewer deeper and coarser thread pitches meaning you only have to turn the air cap one and a half turns for removal. NO BAFFLES needed with this gun so less parts to stock and replace saving you time and money, the INTEGRA also has the tried and tested ONE COMPONENT NEEDLE PACKING cartridge.\u003cbr data-mce-fragment=\"1\"\u003e Designed with a new LINEAR FAN ADJUSTER for a more responsive finer incremented adjustment which also helps when precise adjustment is needed and a quicker full fan to spot is required. The AIR VALVE SEAT is also new with oversized distribution holes which helps control the balance and performance of the droplets and improves the atomisation properties of the spray gun.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eFT nozzle\u003c\/li\u003e\n\u003cli\u003eEXTENDED LIFESPAN with its new internal chrome plating\u003c\/li\u003e\n\u003cli\u003eSMOOTH RESPONSIVE TRIGGER\u003c\/li\u003e\n\u003cli\u003eREDESIGNED AIR VALVE SEAT making easy maintenance and reducing the risk of damage from over-tightening\u003c\/li\u003e\n\u003cli\u003eNEW ERGONOMIC GUN BODY AND DESIGN\u003c\/li\u003e\n\u003cli\u003eGROOVED NEEDLE END for easier removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr\u003e\n\u003c\/div\u003e"}
Anest Iwata WS400 Series 2 Spray Gun - Clear - Non Digital

Translation missing: en.products.product.regular_price ~~£445.00~~ £400.00 On Sale
{"id":6660068180105,"title":"Anest Iwata W200 Integra FT Pressure Spray Gun","handle":"anest-iwata-w200-integra-ft-pressure-spray-gun","description":"\u003cdiv class=\"spec\"\u003eThe new Anest Iwata W200 Integra pressure feed air spray gun is a high quality full-size spray gun designed for use exclusively with paint pressure pots or double diaphragm pumps.\u003c\/div\u003e\n\u003cdiv class=\"desc\"\u003eDesigned for EASIER MAINTENANCE than most guns on the market having been designed with fewer deeper and coarser thread pitches meaning you only have to turn the air cap one and a half turns for removal. NO BAFFLES needed with this gun so less parts to stock and replace saving you time and money, the INTEGRA also has the tried and tested ONE COMPONENT NEEDLE PACKING cartridge.\u003cbr data-mce-fragment=\"1\"\u003e Designed with a new LINEAR FAN ADJUSTER for a more responsive finer incremented adjustment which also helps when precise adjustment is needed and a quicker full fan to spot is required. The AIR VALVE SEAT is also new with oversized distribution holes which helps control the balance and performance of the droplets and improves the atomisation properties of the spray gun.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eFT nozzle\u003c\/li\u003e\n\u003cli\u003eEXTENDED LIFESPAN with its new internal chrome plating\u003c\/li\u003e\n\u003cli\u003eSMOOTH RESPONSIVE TRIGGER\u003c\/li\u003e\n\u003cli\u003eREDESIGNED AIR VALVE SEAT making easy maintenance and reducing the risk of damage from over-tightening\u003c\/li\u003e\n\u003cli\u003eNEW ERGONOMIC GUN BODY AND DESIGN\u003c\/li\u003e\n\u003cli\u003eGROOVED NEEDLE END for easier removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr\u003e\n\u003c\/div\u003e","published_at":"2021-10-06T08:33:07Z","created_at":"2021-10-06T08:28:42Z","vendor":"Spray Guns","type":"","tags":["Anest Iwata"],"price":32283,"price_min":32283,"price_max":32283,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39536839065737,"title":"0.8mm","option1":"0.8mm","option2":null,"option3":null,"sku":"130459A0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anest Iwata W200 Integra FT Pressure Spray Gun - 0.8mm","public_title":"0.8mm","options":["0.8mm"],"price":32283,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":39536839098505,"title":"1.0mm","option1":"1.0mm","option2":null,"option3":null,"sku":"130460A0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anest Iwata W200 Integra FT Pressure Spray Gun - 1.0mm","public_title":"1.0mm","options":["1.0mm"],"price":32283,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":39536839131273,"title":"1.2mm","option1":"1.2mm","option2":null,"option3":null,"sku":"130461A0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anest Iwata W200 Integra FT Pressure Spray Gun - 1.2mm","public_title":"1.2mm","options":["1.2mm"],"price":32283,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":39576308678793,"title":"1.4mm","option1":"1.4mm","option2":null,"option3":null,"sku":"130462A0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anest Iwata W200 Integra FT Pressure Spray Gun - 1.4mm","public_title":"1.4mm","options":["1.4mm"],"price":32283,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":39706079592585,"title":"1.5mm","option1":"1.5mm","option2":null,"option3":null,"sku":"130463A0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anest Iwata W200 Integra FT Pressure Spray Gun - 1.5mm","public_title":"1.5mm","options":["1.5mm"],"price":32283,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-110.jpg?v=1707405729","\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-345.jpg?v=1707405732"],"featured_image":"\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-110.jpg?v=1707405729","options":["Set Up Size"],"media":[{"alt":"Anest Iwata W200 Integra Ft Pressure Spray Gun","id":24535906910345,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-110.jpg?v=1707405729"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-110.jpg?v=1707405729","width":800},{"alt":"Anest Iwata W200 Integra Ft Pressure Spray Gun","id":24535907008649,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-345.jpg?v=1707405732"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-345.jpg?v=1707405732","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"spec\"\u003eThe new Anest Iwata W200 Integra pressure feed air spray gun is a high quality full-size spray gun designed for use exclusively with paint pressure pots or double diaphragm pumps.\u003c\/div\u003e\n\u003cdiv class=\"desc\"\u003eDesigned for EASIER MAINTENANCE than most guns on the market having been designed with fewer deeper and coarser thread pitches meaning you only have to turn the air cap one and a half turns for removal. NO BAFFLES needed with this gun so less parts to stock and replace saving you time and money, the INTEGRA also has the tried and tested ONE COMPONENT NEEDLE PACKING cartridge.\u003cbr data-mce-fragment=\"1\"\u003e Designed with a new LINEAR FAN ADJUSTER for a more responsive finer incremented adjustment which also helps when precise adjustment is needed and a quicker full fan to spot is required. The AIR VALVE SEAT is also new with oversized distribution holes which helps control the balance and performance of the droplets and improves the atomisation properties of the spray gun.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eFT nozzle\u003c\/li\u003e\n\u003cli\u003eEXTENDED LIFESPAN with its new internal chrome plating\u003c\/li\u003e\n\u003cli\u003eSMOOTH RESPONSIVE TRIGGER\u003c\/li\u003e\n\u003cli\u003eREDESIGNED AIR VALVE SEAT making easy maintenance and reducing the risk of damage from over-tightening\u003c\/li\u003e\n\u003cli\u003eNEW ERGONOMIC GUN BODY AND DESIGN\u003c\/li\u003e\n\u003cli\u003eGROOVED NEEDLE END for easier removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr\u003e\n\u003c\/div\u003e"}
Anest Iwata AZ3 HTE-S Chrome Flash Gravity Spray Gun

Translation missing: en.products.product.regular_price £132.50
{"id":6660068180105,"title":"Anest Iwata W200 Integra FT Pressure Spray Gun","handle":"anest-iwata-w200-integra-ft-pressure-spray-gun","description":"\u003cdiv class=\"spec\"\u003eThe new Anest Iwata W200 Integra pressure feed air spray gun is a high quality full-size spray gun designed for use exclusively with paint pressure pots or double diaphragm pumps.\u003c\/div\u003e\n\u003cdiv class=\"desc\"\u003eDesigned for EASIER MAINTENANCE than most guns on the market having been designed with fewer deeper and coarser thread pitches meaning you only have to turn the air cap one and a half turns for removal. NO BAFFLES needed with this gun so less parts to stock and replace saving you time and money, the INTEGRA also has the tried and tested ONE COMPONENT NEEDLE PACKING cartridge.\u003cbr data-mce-fragment=\"1\"\u003e Designed with a new LINEAR FAN ADJUSTER for a more responsive finer incremented adjustment which also helps when precise adjustment is needed and a quicker full fan to spot is required. The AIR VALVE SEAT is also new with oversized distribution holes which helps control the balance and performance of the droplets and improves the atomisation properties of the spray gun.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eFT nozzle\u003c\/li\u003e\n\u003cli\u003eEXTENDED LIFESPAN with its new internal chrome plating\u003c\/li\u003e\n\u003cli\u003eSMOOTH RESPONSIVE TRIGGER\u003c\/li\u003e\n\u003cli\u003eREDESIGNED AIR VALVE SEAT making easy maintenance and reducing the risk of damage from over-tightening\u003c\/li\u003e\n\u003cli\u003eNEW ERGONOMIC GUN BODY AND DESIGN\u003c\/li\u003e\n\u003cli\u003eGROOVED NEEDLE END for easier removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr\u003e\n\u003c\/div\u003e","published_at":"2021-10-06T08:33:07Z","created_at":"2021-10-06T08:28:42Z","vendor":"Spray Guns","type":"","tags":["Anest Iwata"],"price":32283,"price_min":32283,"price_max":32283,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39536839065737,"title":"0.8mm","option1":"0.8mm","option2":null,"option3":null,"sku":"130459A0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anest Iwata W200 Integra FT Pressure Spray Gun - 0.8mm","public_title":"0.8mm","options":["0.8mm"],"price":32283,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":39536839098505,"title":"1.0mm","option1":"1.0mm","option2":null,"option3":null,"sku":"130460A0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anest Iwata W200 Integra FT Pressure Spray Gun - 1.0mm","public_title":"1.0mm","options":["1.0mm"],"price":32283,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":39536839131273,"title":"1.2mm","option1":"1.2mm","option2":null,"option3":null,"sku":"130461A0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anest Iwata W200 Integra FT Pressure Spray Gun - 1.2mm","public_title":"1.2mm","options":["1.2mm"],"price":32283,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":39576308678793,"title":"1.4mm","option1":"1.4mm","option2":null,"option3":null,"sku":"130462A0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anest Iwata W200 Integra FT Pressure Spray Gun - 1.4mm","public_title":"1.4mm","options":["1.4mm"],"price":32283,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":39706079592585,"title":"1.5mm","option1":"1.5mm","option2":null,"option3":null,"sku":"130463A0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anest Iwata W200 Integra FT Pressure Spray Gun - 1.5mm","public_title":"1.5mm","options":["1.5mm"],"price":32283,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-110.jpg?v=1707405729","\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-345.jpg?v=1707405732"],"featured_image":"\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-110.jpg?v=1707405729","options":["Set Up Size"],"media":[{"alt":"Anest Iwata W200 Integra Ft Pressure Spray Gun","id":24535906910345,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-110.jpg?v=1707405729"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-110.jpg?v=1707405729","width":800},{"alt":"Anest Iwata W200 Integra Ft Pressure Spray Gun","id":24535907008649,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-345.jpg?v=1707405732"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/sprayguns.co.uk\/cdn\/shop\/files\/anest-iwata-w200-integra-ft-pressure-spray-gun-345.jpg?v=1707405732","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"spec\"\u003eThe new Anest Iwata W200 Integra pressure feed air spray gun is a high quality full-size spray gun designed for use exclusively with paint pressure pots or double diaphragm pumps.\u003c\/div\u003e\n\u003cdiv class=\"desc\"\u003eDesigned for EASIER MAINTENANCE than most guns on the market having been designed with fewer deeper and coarser thread pitches meaning you only have to turn the air cap one and a half turns for removal. NO BAFFLES needed with this gun so less parts to stock and replace saving you time and money, the INTEGRA also has the tried and tested ONE COMPONENT NEEDLE PACKING cartridge.\u003cbr data-mce-fragment=\"1\"\u003e Designed with a new LINEAR FAN ADJUSTER for a more responsive finer incremented adjustment which also helps when precise adjustment is needed and a quicker full fan to spot is required. The AIR VALVE SEAT is also new with oversized distribution holes which helps control the balance and performance of the droplets and improves the atomisation properties of the spray gun.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eFT nozzle\u003c\/li\u003e\n\u003cli\u003eEXTENDED LIFESPAN with its new internal chrome plating\u003c\/li\u003e\n\u003cli\u003eSMOOTH RESPONSIVE TRIGGER\u003c\/li\u003e\n\u003cli\u003eREDESIGNED AIR VALVE SEAT making easy maintenance and reducing the risk of damage from over-tightening\u003c\/li\u003e\n\u003cli\u003eNEW ERGONOMIC GUN BODY AND DESIGN\u003c\/li\u003e\n\u003cli\u003eGROOVED NEEDLE END for easier removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr\u003e\n\u003c\/div\u003e"}
10 tear off visor covers for Anest Iwata airfed mask VIUAF2112K10

Translation missing: en.products.product.regular_price £18.69

Login

Reset your password

Create Account