Q-Tech
Save even more when you buy the Q5 HVLP turbine and the 2ltr remote pot together in a bundle deal.
The Q-Tech Q5 5 stage HVLP turbine unit. The ultimate professional HVLP turbine system that comes complete with professional Suction or Gravity spray gun.
Low-pressure spraying systems are perfect where space is limited and for on-site spraying, classic cars, shop fitting, decorating, custom kitchen fitters and bath re-enamellers - anywhere needing clean, hassle free spray with a great finish.
Suction spray gun with 1.5mm set up installed
Side mounted fan control
Low noise level
Quick change air filters
High Transfer Efficiency – ensures fine atomisation
Stainless steel nozzles & needles ranging from 0.8mm - 2.5mm available to order
110v or 230v options
MWP 9.5psi
Weight 14.8Kg
Supplied with 1.5mm nozzle
Cup (Gravity): 600ml
Non-bleed design, air only passes through when trigger is pulled
Side mounted spray pattern control knob allows continuous easy adjustment
Centre mounted 600cc nylon gravity cup
A stay-cool nylon handle (fitted over a metal tube)
Stainless steel fluid passages and external needle packing adjustment
Metal fluid knob and collar, stainless steel internal components
Rear rotating nipple for pressure tubes, easier use for the left-handed
The Q75 Spray Gun features an exclusive side-mounted pattern control knob to adjust the size of the fan. This knob allows you to switch from a small to large spray pattern, or anywhere in between. Unlike HVLP turbine spray guns with the front collar adjustment, the pattern control knob offers full incremental fan size throughout the whole range. The fan pattern is adjustable from 25mm to 380mm from a distance of 200mm. Smaller than 25mm is achieved by moving closer to the object to be sprayed. In a nutshell, this gun is completely 100% controllable!
Supplied with 1.5mm nozzle
Cup (Suction): 950ml
Non-bleed design, air only passes through when trigger is pulled
Side mounted spray pattern control knob allows continuous easy adjustment
Under mounted 950cc aluminium suction cup
A stay-cool nylon handle (fitted over a metal tube)
Stainless steel fluid passages and external needle packing adjustment
Metal fluid knob and collar, stainless steel internal components
Rear rotating nipple for pressure tubes, easier use for the left-handed
The Q70 Spray Gun features an exclusive side-mounted pattern control knob to adjust the size of the fan. This knob allows you to switch from a small to large spray pattern, or anywhere in between. Unlike HVLP turbine spray guns with the front collar adjustment, the pattern control knob offers full incremental fan size throughout the whole range. The fan pattern is adjustable from 25mm to 380mm from a distance of 200mm. Smaller than 25mm is achieved by moving closer to the object to be sprayed. In a nutshell, this gun is completely 100% controllable!
This all-new range of Q-Tech Turbines combines the cost-effectiveness of the Q-Tech brand with the best in manufacturing from North America. Designed with the professional decorator in mind, these machines bring together in one easily understood range all the choices the trade person looks for.
Suction non-bleed spray gun with 1.5mm set up installed
Side mounted fan control
Low noise level
Quick change air filters
High Transfer Efficiency – ensures fine atomisation
Stainless steel nozzles & needles ranging from 0.8mm - 2.5mm available to order
110v or 230v options
MWP 6.5psi
Weight 13.9Kg
The Q-Tech Q5 5 stage HVLP turbine unit. The ultimate professional HVLP turbine system that comes complete with professional Gravity spray gun.
Low-pressure spraying systems are perfect where space is limited and for on-site spraying, classic cars, shop fitting, decorating, custom kitchen fitters and bath re-enamellers - anywhere needing clean, hassle free spray with a great finish.
Gravity non-bleed spray gun with 1.5mm set up installed
Side mounted fan control
Low noise level
Quick change air filters
High Transfer Efficiency – ensures fine atomisation
Stainless steel nozzles & needles ranging from 0.8mm - 2.5mm available to order
110v or 230v options
MWP 9.5psi
Weight 14.8Kg
Bonus Deal -1 QuickConnect Spray Tip Starter Pack included with purchase
QTech iQ3 Airless Paint Sprayer is a powerful painting tool that delivers a flow of up to 2.9 ltr/min and a maximum tip of 0.027″. It is durable and reliable, with a motor of 1300 watts and a MWP of 207 bar/3000 psi. Perfect for spraying internal walls, ceilings, external walls, and roofs, it is covered by a reliable WarrantyPlus warranty.
The QTech iQ3 Airless Paint Sprayer is a hard-working airless sprayer that easily copes with large volumes of trade decorating. Updated with a new modern look and sturdy design that copes with the rigours of on-site working. This Airless Sprayer is compatible with most modern coatings, including premium water-based paints.
An extra year’s warranty is available with Warranty Plus when you register your machine within three months of purchase (registration form link can be found below).
It’s all about control: A unique first in the market, the Intelligent Pressure Technology (IPT) allows for the smallest incremental changes in pressure. An operating pressure as low as 500 psi can be maintained and held. Put real control where you need it – in your hands.
Higher level of efficiency: Ensure the job is done quicker, with less overspray and maintenance.
Broad performance band: Use the one airless paint sprayer to ensure an enhanced quality finish that fits all aspects of your work. External walls? Box ticked. Internal walls and ceilings? Box ticked. Staircases? Box ticked. Kitchen re-sprays? Box ticked. Fine finish cabinet? Box ticked.
Use to spray:
- Emulsion, interior and exterior
- Water or solvent-based topcoats
- Wood preservatives
- Most other medium-viscosity water or solvent-based coatings
Usage frequency:
- Most of the week
Supplied with:
- QTech Q345 airless spray gun
- QTech Contractor 517 airless tip & guard
- 1/4″ x 15m textile braided hose assembly.
Specification:
- Flow 2.90 ltr/min
- Max tip 0.027″
- MWP 207 bar | 3000 psi
- Motor 1300 watt
- Weight 33.0 kg
- Power supply 110 / 240 volt
Warranty:
For two years from the date of purchase, your QTech Airless Sprayers are warranted under normal use and service against all manufacturing defects. The replacement of any and all wear parts, including the packings, prime valve and piston, due to normal in-service wear and tear is not covered by this warranty. This could invalidate the warranty if servicing has not been carried out at the recommended intervals. To apply for the additional years warranty with the 2+1 Year Defect Warranty Plus, please use the following link and complete the registration form within three months of purchase https://sprayforthedecorator.com/warrantyplus/.
Bonus Deal - 1 QuickConnect Spray Tip Starter Pack included with purchase
QTech iQ3 Airless Paint Sprayer is a powerful painting tool that delivers a flow of up to 2.9 ltr/min and a maximum tip of 0.027″. It is durable and reliable, with a motor of 1300 watts and a MWP of 207 bar/3000 psi. Perfect for spraying internal walls, ceilings, external walls, and roofs, it is covered by a reliable WarrantyPlus warranty.
The QTech iQ3 Airless Paint Sprayer is a hard-working airless sprayer that easily copes with large volumes of trade decorating. Updated with a new modern look and sturdy design that copes with the rigours of on-site working. This Airless Sprayer is compatible with most modern coatings, including premium water-based paints.
An extra year’s warranty is available with Warranty Plus when you register your machine within three months of purchase (registration form link can be found below).
It’s all about control: A unique first in the market, the Intelligent Pressure Technology (IPT) allows for the smallest incremental changes in pressure. An operating pressure as low as 500 psi can be maintained and held. Put real control where you need it – in your hands.
Higher level of efficiency: Ensure the job is done quicker, with less overspray and maintenance.
Broad performance band: Use the one airless paint sprayer to ensure an enhanced quality finish that fits all aspects of your work. External walls? Box ticked. Internal walls and ceilings? Box ticked. Staircases? Box ticked. Kitchen re-sprays? Box ticked. Fine finish cabinet? Box ticked.
Use to spray:
- Emulsion, interior and exterior
- Water or solvent-based topcoats
- Wood preservatives
- Most other medium-viscosity water or solvent-based coatings
Usage frequency:
- Most of the week
Supplied with:
- QTech Q345 airless spray gun
- QTech Contractor 517 airless tip & guard
- 1/4″ x 15m textile braided hose assembly.
Specification:
- Flow 2.90 ltr/min
- Max tip 0.027″
- MWP 207 bar | 3000 psi
- Motor 1300 watt
- Weight 33.0 kg
- Power supply 110 / 240 volt
Warranty:
For two years from the date of purchase, your QTech Airless Sprayers are warranted under normal use and service against all manufacturing defects. The replacement of any and all wear parts, including the packings, prime valve and piston, due to normal in-service wear and tear is not covered by this warranty. This could invalidate the warranty if servicing has not been carried out at the recommended intervals. To apply for the additional years warranty with the 2+1 Year Defect Warranty Plus, please use the following link and complete the registration form within three months of purchase https://sprayforthedecorator.com/warrantyplus/.
The Q-Tech Q5 5 stage HVLP turbine unit. The ultimate professional HVLP turbine system that comes complete with professional Suction spray gun.
Low-pressure spraying systems are perfect where space is limited and for on-site spraying, classic cars, shop fitting, decorating, custom kitchen fitters and bath re-enamellers - anywhere needing clean, hassle free spray with a great finish.
Suction non-bleed spray gun with 1.5mm set up installed
Side mounted fan control
Low noise level
Quick change air filters
High Transfer Efficiency – ensures fine atomisation
Stainless steel nozzles & needles ranging from 0.8mm - 2.5mm available to order
110v or 230v options
MWP 9.5psi
Weight 14.8Kg