Wagner
The low holding force for the trigger and an ergonomically designed pistol grip enable this ergonomic achievement. Making the material wetted parts in stainless steel allows water-based paints and solvent based materials to be applied. In addition, the material filter integrated in the handle guarantees optimal process reliability.
Robust & reliable Airless manual gun for up to 270 bar for Airless finishing applications, including filter and swivel joint.
• Perfect Handling – The integrated swivel joint and low trigger holding forces make for reduced fatigue
• Very High Reliability – All parts that coming into contact with the material are made of stainless steel. This makes it possible to process water-based paints and solvent based materials.
• Integrated Filter – in the handle guarantees optimal process reliability.
• Excellent Flow Characteristics – Excellent flow characteristics due to the absence of a spring in the material section.
• Optimal Configuration – With three different nozzle variants, you always have the right configuration at hand.
To make coating materials sprayable they may have to be diluted. Thanks to the heating hose system not only can the solvents be reduced but also the applied film thicknesses
can be increased. Plus constant paint temperatures help to achieve constant application techniques even at low outside temperatures
The answer to the VOC guidelines: The coating material can be set to the spraying viscosity without being diluted. This is of particular benefit especially for higher viscosity materials.
H326 specification
Voltage 230v/50Hz
Heating Power 1300w
Mains Lead 4m
Hose DN10 (3/8") 30m PU Sheath
Max. Pressure 3625PSI/25MPa
Temperature Regulation 20° – 60°
Weight 23kg
The Wagner SF 20ltr Emulsion hopper 341266
The perfect accessory for the SF airless sprayers when working on larger residential or commercial projects.
No more refill after refill, the 20ltr hopper can offer over 200 sq meter coverage per fill (product dependent).
The Wagner Super Finish SF 23 CR offers the following features:
Motor power: 1,3 kW
Voltage: 230 V / 50 Hz
Max. delivery rate: 2,6 l/min
Max. pressure: 250 bar
Weight: 29 kg
The delivery of the Wagner Super Finish SF 23 CR includes:
Wagner Super Finish SF 23 CR - Basic unit on trolley
upper tank, 5 litres
High pressure hose 1/4", 15 m
Wagner paint spray gun with injection attachment
Operating instructions
The Wagner Super Finish SF 23 CR is suitable for the following applications and materials:
Epoxy resin
Polyurethane PU
SPUR foam
Aqueous solutions
Higher-quality service life means longer lasting parts and improved performance over the unit’s lifetime in comparison with a standard SF23 Pro.
Improved construction for improved operational reliability in combination with the SuperFinish’s high performance brushless motor.
HEA starter kit bundle with suction/return hoses and hopper options included for additional project flexibility.
Voltage: 230 V / 50 Hz
Max. delivery rate: 2,6 l/min
Max. pressure: 250 bar
Weight: 29 kg
The perfect accessory for the SF airless sprayer allowing far smaller quantities for paint and coatings to be applied with less waste.
The professional double-acting technology brings even material delivery, less wear and a longer service life. This makes the PowerPainter 90 Extra the ideal choice when it comes to spraying emulsion and wood and metal paints. The ideal price/performance ratio with professional results.
- Easy commissioning and high operational reliability: Multiple components in the PowerPainter 90 Extra have been created to ensure easier operability and to ensure safe working: the innovative inlet valve can be safely and easily released with the press of a finger. No additional tools are needed any more. The green marking on the HEA pressure gauge helps to ensure optimised pressure regulation. This makes it possible to achieve the perfect spray result. The site-optimised Prime / Spray switch ensures safe and reliable pressure relief every time.
- The 15-metre-long DN6 HD hose supports a large radius of movement of up to 30 m. The PowerPainter 90 Extra guarantees easy transportation and space-saving storage in both versions. On the cart version, the height-adjustable telescopic handle with integrated hose holder ensures this. On the rack-mounted version, the compact size and light weight of the device play their part.
- Fatigue-free and comfortable working: Ergonomic, modified paint spray guns and hoses in various lengths create flexibility. The low amount of effort required and healthier posture during application make day-to-day work much easier. Direct suction from the original container also does away with the tiresome task of having to top up material. This cuts overall material consumption and you also save work time.
- Less spray mist thanks to HEA technology: Thanks to HEA technology, excellent atomisation is possible even at a low pressure setting of 80 – 140 bar. When the revolutionary low-pressure Airless HEA ProTip nozzle is used too, this ensures up to 55 % less spray mist. This means a soft spray pattern with maximum paint application control is guaranteed.
- Lucrative must-have for increased efficiency: Compared to conventional, manual working with a brush and roller, the procurement costs are admittedly higher to begin with, however a comparison of performance in this class of device make them relatively low. This type of paint spray device pays for itself after just a few projects. The duration of the project is shortened thanks to the quick way of working.
Motor 800W 230v
Maximum delivery rate: 1.25Ltr/min
Maximum spray pressure: 200bar
Suitable for both solvent & water-based paints & varnishes
15m hose with the Vector Pro airless spray gun and 517 HEA ProTip airless spray tip
The ACF3000 PLUS nozzles use a pre-atomisating technology to offer the finest product atomisation when applying professional coatings.
Perfect with little pressure: Little overspray already from only 900psi material pressure dependant on coating.
Technically advanced spray tip geometry ensures uniform application of coatings with soft edge zones during application.
Highest quality tungsten carbide assures longest life and durability
Wagner heated hose sets, GM4600 AirCoat spray guns, tip clean soloutions and much more is available to support the Wagner AirCoat technology.
utilising reduced pressure and a new innovative spray tips the Control Pro HEA guns guarantee a streak-free, perfect paint coverage.
Key benefits
Lightweight Gun with ergonomic handle & extra-light two-finger trigger for maximum operating comfort
1-Finger Safety Catch, release & spray with one hand
The gun is build to be ergonomic and light & lies comfortably in the hand.
Suitable for:
Wagner Control Pro HEA 250 R
Wagner Control Pro HEA 250 M
Wagner Control Pro HEA 350 R
Wagner Control Pro HEA 350 M
Wagner Control Pro HEA 350 Extra (Skid & Trolley)
Titan Control Max HEA 1500
Titan Control Max HEA 1700
Titan Control Max HEA 1900
Not suitable for:
Any other airless spray machine
The Wagner SF23 Plus airless spray package offers 10% Higher Spraying Pressures and 50% Less Wear Parts
Diaphragm pumps are a great choice when it comes to handling a wide variety of materials, from thin liquids to high-viscosity paints. QLS technology and low stroke frequency puts less stress on the components, significantly extending the service life of the pump and reducing maintenance costs. Valves are made of wear-resistant carbide and the diaphragm is made of solvent resistant polyamide. The SF23 Plus diaphragm pump has no noticeable pulsation, which when coupled with the hopper makes it ideal for fine finish work and small colour runs.
Ideal for spraying various decorative and industrial coatings, primers, emulsions, lacquers and gloss finishes. Great in the workshop or on the construction site. Also available as air coat version.
The QLS-technology is standard equipment in each SuperFinish unit. The lower stroke frequency considerably reduces wear on the components, thus offering a longer service life and a minimum of maintenance.
Maximum Tip: .023" (One Gun)Maximum Pressure: 3600psi (230 Bar)
The Wagner SF23 Plus airless spray package offers 10% Higher Spraying Pressures and 50% Less Wear Parts
Diaphragm pumps are a great choice when it comes to handling a wide variety of materials, from thin liquids to high-viscosity paints. QLS technology and low stroke frequency puts less stress on the components, significantly extending the service life of the pump and reducing maintenance costs. Valves are made of wear-resistant carbide and the diaphragm is made of solvent resistant polyamide. The SF23 Plus diaphragm pump has no noticeable pulsation, which when coupled with the hopper makes it ideal for fine finish work and small colour runs.
Ideal for spraying various decorative and industrial coatings, primers, emulsions, lacquers and gloss finishes. Great in the workshop or on the construction site. Also available as air coat version.
The QLS-technology is standard equipment in each SuperFinish unit. The lower stroke frequency considerably reduces wear on the components, thus offering a longer service life and a minimum of maintenance.
Maximum Tip: .023" (One Gun)Maximum Pressure: 3600psi (230 Bar)
Flex Length 5 m
Weight 9.4 kg
Hose Length 5 m
Warranty 1 Year
Power Output 2750 W
Voltage 230 V
Safety Cut-Out Temperature 105 °C
Tank Capacity 7.5 Ltr