Anest Iwata
Replace this item as part of your routine maintenance schedule to ensure compliance with class 3 certification.
Note VIUAF2006 is now replaced by VIUAFG-N-AF-MC, VIUAFG-N-AF-MC is the current filter now both both old AF2010 and new AF2020 air fed mask models.
Filter only included, other images are for reference purposes only.
The Series 2 WS400 / LS400 range raises the standard of paint application, Anest Iwata continues to seek perfection and even closer to that goal with the Series 2.
The combination of Pininfarina's ergonomic design and the optimised pre-atomisation capabilities of our split nozzle 2.0, the Series 2 range takes takes paint application to a new level.
Other improvements include:
• Scratch resistant PVD coating
• Linear fan and fluid adjustment system
• Refined trigger action
• Double tapered thread system
The Series 2 WS400 / LS400 range raises the standard of paint application, Anest Iwata continues to seek perfection and even closer to that goal with the Series 2.
The combination of Pininfarina's ergonomic design and the optimised pre-atomisation capabilities of our split nozzle 2.0, the Series 2 range takes takes paint application to a new level.
LS-400 BASE: The new LS-400 Base is a unique HVLP Hybrid spray gun designed for the application of both water-borne and solvent-based basecoats. LS-400 Base comes in two nozzle variants, ET and ETS.
Other improvements include:
• Hard wearing twilight chrome finish
• Linear fan and fluid adjustment system
• Refined trigger action
• Double tapered thread system
• The all new HVC inline pressure regulator is recommended
• Double tapered thread system
Infra-Red units provide a cost effective method of paint drying. Curing can be achieved in just minutes, using the highly effective short wave infra-red lamp.
The 1KW heater can be held by hand using the handle supplied or can be fixed to the H-Stand at your desired height using the bracket supplied.
Technical Specifications
Heat T.E.C 1kW
Minimum Static Operating Distance: 500mm (when mounted on its stand)
Dimensions: 400 x 140 x 85mm
Electrical Specification: 220/240V 1kW 50Hz
Single Phase – 4.25 amps
- Flat and long pattern even spraying heavy materials
- Newly Designed Air Caps
- High Transfer Efficiency (HTE Technology)
- Easy Manoeuvrability & Improved Ergonomics
- Polished Flat & Smooth Body Surface for Easy Fast Cleaning
The Series 2 WS400 / LS400 range raises the standard of paint application, Anest Iwata continues to seek perfection and even closer to that goal with the Series 2.
The combination of Pininfarina's ergonomic design and the optimised pre-atomisation capabilities of our split nozzle 2.0, the Series 2 range takes takes paint application to a new level.
WS-400 BASE: The all new WS-400 base has been designed for compliant applications, OBS stands for Optimum Base coat Settings. Re-engineered air caps and nozzles create an out the box experience, producing best in class performance.
Other improvements include:
• Hard wearing twilight chrome finish
• Linear fan and fluid adjustment system
• Refined trigger action
• Double tapered thread system
• The all new HVC inline pressure regulator is recommended
The Series 2 WS400 / LS400 range raises the standard of paint application, Anest Iwata continues to seek perfection and even closer to that goal with the Series 2.
The combination of Pininfarina's ergonomic design and the optimised pre-atomisation capabilities of our split nozzle 2.0, the Series 2 range takes takes paint application to a new level.
Other improvements include:
• Hard wearing twilight chrome finish
• Linear fan and fluid adjustment system
• Refined trigger action
• Double tapered thread system
• The all new HVC inline pressure regulator is recommended
The atomizing air flow cuts the paint stream like a knife and controls the droplets efficiently. Working at a lower pressure enables lower air consumption through the flat tip nozzle system.
- Perfect surfaces by Split Nozzle Technology at its best
- VOC-compliant professional spray gun, significantly more than 65% transfer efficiency
- Very fine atomization
- Clearly visible reduction of fat edges
- Characteristically for ANEST IWATA: quiet and pleasant background noise
- With 380g one of the most lightweight guns on the market
- Conical seal nozzle, minimum wear parts
- Quality surface for an easy cleaning
- Clearer design, easy maintenance
- Compatible with the 3M PPS Cup system
The Series 2 WS400 / LS400 range raises the standard of paint application, Anest Iwata continues to seek perfection and even closer to that goal with the Series 2.
The combination of Pininfarina's ergonomic design and the optimised pre-atomisation capabilities of our split nozzle 2.0, the Series 2 range takes takes paint application to a new level.
LS-400 BASE: The new LS-400 Base is a unique HVLP Hybrid spray gun designed for the application of both water-borne and solvent-based basecoats. LS-400 Base comes in two nozzle variants, ET and ETS.
Other improvements include:
• All new quick detachable digital manometer (DPG-1)
• Scratch resistant PVD coating
• Linear fan and fluid adjustment system
• Refined trigger action
• Double tapered thread system
The Series 2 WS400 / LS400 range raises the standard of paint application, Anest Iwata continues to seek perfection and even closer to that goal with the Series 2.
The combination of Pininfarina's ergonomic design and the optimised pre-atomisation capabilities of our split nozzle 2.0, the Series 2 range takes takes paint application to a new level.
WS-400 BASE: The all new WS-400 base has been designed for compliant applications, OBS stands for Optimum Base coat Settings. Re-engineered air caps and nozzles create an out the box experience, producing best in class performance.
Other improvements include:
• Scratch resistant PVD coating
• Linear fan and fluid adjustment system
• Refined trigger action
• Double tapered thread system
Anest Iwata WS-Primer: Optimized for High Build and Filler Primer Applications
Achieve outstanding efficiency and premium finishes with the WS-Primer, designed to reduce sanding time and material consumption. By ensuring a proper application, this spray gun saves time and money while delivering flawless, professional results.
Key Features:
- Super Flat Material Laydown: Achieve an ultra-smooth surface with ease.
- Reduced Sanding Time: Minimize labour and effort post-application.
- Lower Abrasive Consumption: Reduce material costs without compromising quality.
The 1.6mm and 1.8mm setups are expertly engineered for High Build and Filler Primers, ensuring precise product delivery for higher-viscosity materials. This configuration enhances speed and fluidity, allowing painters to work efficiently while achieving top-tier results.
Exceptional Spray Pattern for High-Viscosity Products: The high-build setups deliver a specialized fan pattern, designed to maximize performance with thicker materials. This ensures flat, even applications that require minimal sanding, streamlining the finishing process.
Additional Benefits:
- Tested with all major paint manufacturers for universal compatibility.
- A go-to solution for painters seeking peak performance and reliability.
- Consistently flat applications for smooth, professional-grade finishes.
Easily identify the High Build/Filler Primer version by its distinctive black adjusters and air cap—a mark of Anest Iwata’s dedication to precision and innovation.
Upgrade your workflow with the WS-Primer—crafted for efficiency, speed, and superior performance.