Products
Airlessco compatible airless pump repair kit 331-210
High quality part made in USA
Fitting advice and guidance available
Installation instructions and parts list included
We also stock hoses, pistons, prime valves etc etc, too many to list everything. Email or call us if you do not find what you need.
The universal industrial spraybooth filter, supplied in 0.9m x 9.14m lengths.
Andreae concertina perforated cardboard paint filters provide lower air flow resistance to maintain high airflow. With a high holding capcity these usually last many times longer than fibreglass filters. Commonly used in spray booths these will capture a wide range of wet particles including any wet solids or liquid particles including high solid paints, oils, stains, glues, fiberglass, lacquers, epoxies, clear coats etc etc.
The Andreae Filter has 2.5" deep holding pockets, giving the Andreae Filter a holding capacity up to 6 times higher than common mesh filters.
Filtration efficiency up to 98,1%
Colour White
Size 0.9m x 9.14m
The use of short wave infrared technology enables body fillers, primers and paints to be cured in typically 10 minutes as opposed to 45 minutes in an oven. Anest Iwata Infra-Red mobile drying systems provide a fast and efficient answer for all your local body repairs.
Infra-Red units provide a cost effective method of paint drying. Curing can be achieved in just minutes, using the highly effective short wave infra-red lamp.
The 1KW heater can be held by hand using the handle supplied or can be fixed to the H-Stand at your desired height using the bracket supplied.
Technical Specifications
Heat T.E.C 1kW
Minimum Static Operating Distance: 500mm (when mounted on its stand)
Dimensions: 400 x 140 x 85mm
Electrical Specification: 220/240V 1kW 50Hz
Single Phase – 4.25 amps
Infra-Red units provide a cost effective method of paint drying. Curing can be achieved in just minutes, using the highly effective short wave infra-red lamp.
The 1KW heater can be held by hand using the handle supplied or can be fixed to the H-Stand at your desired height using the bracket supplied.
Technical Specifications
Heat T.E.C 1kW
Minimum Static Operating Distance: 500mm (when mounted on its stand)
Dimensions: 400 x 140 x 85mm
Electrical Specification: 220/240V 1kW 50Hz
Single Phase – 4.25 amps
LPH80 suitable Anest Iwata paint cup
LPH80 Cup 250ml VPE250
Anest Iwata 3kW HEAT T.E.C. Infrared Unit.
Even heat distribution over the widest possible target area leads to high efficiency and the best paint finish. Anest Iwata has designed the parabolic reflector used in all the infrared drying systems to maximise efficiency. The parabolic reflector gives a totally uniform heat pattern. Efficiency increases of up to 90% are made over conventional systems plus drying time cut from typically 45mins to 10minutes, faster throughput and lower energy costs give a rapid return on investment. Anest Iwata short wave lamps are specifically tuned for paint drying and in normal use will comfortably last 20,000 hours.
Horizontal or vertical cassette operation
Long lamp life of at least 20,000 hours
Locking gas strut to fix arm height
Reduced energy consumption, no fans or filter changes
Manufactured from top quality steel & aluminum
Robustly packaged
Easy to assemble & Install
Easy lamp changes
Low glare lamps for eye safety in the workplace
Horizontal or vertical cassette operation
Long lamp life of at least 20,000 hours
Locking gas strut to fix arm height
Reduced energy consumption, no fans or filter changes
Manufactured from top quality steel & aluminum
Robustly packaged
Easy to assemble & Install
Easy lamp changes
Low glare lamps for eye safety in the workplace
AZ Range suitable Anest Iwata paint cup
Akulon cup 600ml
Part number W0CUPAZ90P
Anest Iwata 600ml Gravity Cup PC-G600P-2
Fits WS-400/LS400 spray guns
Anest Iwata 600ml Gravity Cup PCG-6P-2-AZ
For use with Anest Iwata HTE-S Impact Gun
Anest Iwata 600ml Gravity Cup PCG-6P-2B-AZ
For use with Anest Iwata AZ3 HTE 2 & AZ3 HTE2 AV Gravity Guns, with G1/4″ (PF1/4″) Brass Connection.
Gravity feed cup for Anest IWATA W400 spray guns.
Equipped with high-quality stainless steel internal thread.
- Cup capacity: 600ml
*LAST REMAINING STOCK*
Anest Iwata’s air breathing set is very easy to wear and highly functional. It complies with European Regulations.
CERTIFIED CLASS 3 AIR FED MASK KIT
• Floating headband adjustment for maximum comfort
• Comfort sweatband
• Easily adjustable headband ratchet
• Wide vision vizor
• Cartridge type vision cassette
• Replaceable vizor cover
• Low noise air diffuser
• Air filter regulator mounted on pliable bracket that moulds to the body
• Carbon filter
• Adjustable air control regulator
• Audible airflow check
• 1,25 metre hose (inner ø 8 mm) for HVLP spray gun
• Air regulator 1 bar pre-set
• Downward airflow for greater comfort
• Y connection and air hose for the gun (8 mm internal diameter; 1,25 length)
• Floating headband adjustment for maximum comfort
• Comfort sweatband
• Easily adjustable headband ratchet
• Wide vision vizor
• Cartridge type vision cassette
• Replaceable vizor cover
• Low noise air diffuser
• Air filter regulator mounted on pliable bracket that moulds to the body
• Carbon filter
• Adjustable air control regulator
• Audible airflow check
• 1,25 metre hose (inner ø 8 mm) for HVLP spray gun
• Air regulator 1 bar pre-set
• Downward airflow for greater comfort
• Y connection and air hose for the gun (8 mm internal diameter; 1,25 length)
Anest Iwata AZ1 HTE-2P Concept Spray Gun, the High Transfer Efficiency range of pressure spray guns feature a newly designed range of air caps. This new technology in the Anest Iwata AZ1 HTE-2P allows even less experienced sprayers to obtain high quality and consistent finishing.
- Flat and long pattern even spraying heavy materials
- Newly Designed Air Caps
- High Transfer Efficiency (HTE Technology)
- Easy Manoeuvrability & Improved Ergonomics
- Polished Flat & Smooth Body Surface for Easy Fast Cleaning