Basket
Basket Basket
Basket 0 item

Wagner heated airless sprayer hose H326

Wagner Heated Airless Sprayer Hose H326
£1,989.00 Excluding VAT
Heated hose systems improve spray and coating properties, even when spraying highly viscous materials.
The Wagner Temp Spray H326 provides the benefits temperature control offers. Heated systems improve spray and coating properties, even when spraying highly viscous materials. This helps reduce material consumption with low overspray and much more besides. To make coating materials sprayable they may have to be diluted. Thanks to the heating hose system not only can the solvents be reduced but also the applied film thicknesses can be increased. Plus constant paint temperatures help to achieve constant application techniques even at low outside temperatures The answer to the VOC guidelines: The coating material can be set to the spraying viscosity without being diluted. This is of particular benefit especially for higher viscosity materials. H326 specification Voltage 230v/50Hz Heating Power 1300w Mains Lead 4m Hose DN10 (3/8") 30m PU Sheath Max. Pressure 3625PSI/25MPa Temperature Regulation 20° – 60° Weight 23kg
← Back to Wagner

Downloads

Heated hose systems improve spray and coating properties, even when spraying highly viscous materials.
The Wagner Temp Spray H326 provides the benefits temperature control offers. Heated systems improve spray and coating properties, even when spraying highly viscous materials. This helps reduce material consumption with low overspray and much more besides. To make coating materials sprayable they may have to be diluted. Thanks to the heating hose system not only can the solvents be reduced but also the applied film thicknesses can be increased. Plus constant paint temperatures help to achieve constant application techniques even at low outside temperatures The answer to the VOC guidelines: The coating material can be set to the spraying viscosity without being diluted. This is of particular benefit especially for higher viscosity materials. H326 specification Voltage 230v/50Hz Heating Power 1300w Mains Lead 4m Hose DN10 (3/8") 30m PU Sheath Max. Pressure 3625PSI/25MPa Temperature Regulation 20° – 60° Weight 23kg

All goods are supplied with a manufacturers twelve month warranty, (or longer in some cases), provided the goods are used in accordance with the manufacturer's instructions. This warranty does not apply to any defect which arises from general wear and tear, losses caused by loss of use of the goods, wilful or accidental damage, or negligence by you or any third party. The cost of returning goods for repair/replacement is the responsibility of the owner, we may request that the item is returned direct to the manufacturer for repair/replacement - if so we will liaise between both parties.

If the goods supplied to you are damaged on delivery they should be signed for as such and you should notify in writing via the e-mail address or fax number shown on the contact page within 48 hours. Your statutory rights are not affected.

Other Customers also buy:

  • Wagner HEA ProTip Low Pressure Airless Spray Tip
    Wagner HEA ProTip Low Pressure Airless Spray Tip
    £24.95
  • Wagner Xvlp 3500 Hand Held 230V Spray System
    Wagner XVLP 3500 Hand Held 230v Spray System
    £350.00
  • Wagner Trade Tip 3 Fine Finish Airless Spray
    Wagner Trade Tip 3 Fine Finish Airless Spray Tip
    £23.95
  • Wagner Tip Clean Refill 1000Ml
    Wagner Tip Clean Refill 1000ml
    £18.63
  • Wagner Hour Glass Tip Clean Storage 200Ml
    Wagner Hour Glass Tip Clean Storage 200ml
    £14.00
  • Wagner Airless Pencil Filter - Push In Red 10 Pack
    Wagner Airless Pencil Filter - Push In - Red - 10 Pack
    £10.95

Login