Our Products

Resin Moulding Tank 10Ltr
Our price £198.95 Saving £75.55

Resin Moulding Casting Tank/Pot 10 Litre
Internal Dimensions H = 22cm D = 26cm.
80Psi maximum working pressure.

Casting under pressure is the best way to make high quality resin castings. This is especially true with difficult recesses and complex moulds. Pressure casting compresses air bubbles to sizes hard to detected by the human eye creating a virtually bubble free casting.
Simply cast your part in your mould and then insert your mould into the pressure pot. Apply positive air pressure from any regulated compressor and leave to cure under pressure.

These tanks are modified for casting only and can not be used for paint. All unused outlets are permanently capped with 150psi 316 stainless steel caps.

Product Options Part No. Price(ex. VAT) Quantity Add To Cart
Resin Moulding Tank 10Ltr APT10ERM £198.95 Add to Cart2

Description

Resin Moulding Casting Tank/Pot 10 Litre
Internal Dimensions Height = 22cm Diameter = 26cm.
80Psi maximum working pressure.

Casting under pressure is the best way to make high quality resin castings. This is especially true with difficult recesses and complex moulds. Pressure casting compresses air bubbles to sizes hard to detected by the human eye creating a virtually bubble free casting.
Simply cast your part in your mould and then insert your mould into the pressure pot. Apply positive air pressure from any regulated compressor and leave to cure under pressure.

These tanks are modified for casting only and can not be used for paint. All unused outlets are permanently capped with 150psi 316 stainless steel caps.

Important points regarding pressure tanks.

The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a maximum working pressure 10psi less than technical maximum.
Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.